Sharp XL-3000W Listening to the Memorised Station

01/3/1 XL-3000W(A)2.fm

Radio

- Listening to the Memorised Station -

Listening to the Memorised Station

„Memorising a station

You can store 30 AM and FM stations in memory and recall them at

the push of a button. (Preset tuning)

Note:

The backup function protects the memorised stations for a few

hours should there be a power failure or the AC power lead discon-

nection.

„To recall a memorised station

„To scan the preset stations

The stations saved in memory can be scanned automatically. (Pre-

set memory scan)

„To clear a memorised station

1Perform the steps 1 - 3 in "Listening to the Radio" on

page 19.

2Press the MEMORY/SET (MEMO-

RY) button to enter the preset tun-

ing saving mode.

3Within 5 seconds, press the PRE-

SET ( or ) button to select the

preset channel number.

Store the stations in memory, in order, starting with preset

channel 1.

4Within 5 seconds, press the MEMO-

RY/SET (MEMORY) button to store

that station in memory.

If the "MEMORY" and preset number indicators go out before

the station is memorised, repeat the operation from step 2.

5Repeat steps 1 - 4 to set other stations, or to change a

preset station.

When a new station is stored in memory, the station previously

memorised will be erased.

Press the PRESET ( or ) button for less than 0.5 seconds to

select the desired station.

Preset channel Frequency and frequency band

1Press the PRESET ( or ) button for more than 0.5

seconds.

The preset number will flash and the programmed stations will

be tuned in sequentially, for 5 seconds each.

2Press the PRESET ( or ) button again when the de-

sired station is located.

1 Recall the memorised station.

2 Whilst it is displayed, press the

MEMORY/SET (MEMORY) but-

ton.

3 Within 5 seconds, press the

CLEAR button on the remote con-

trol.

Listening to the Radio (See page 19.)