Sharp XL-DAB151PH(BK) Troubleshooting chart continued, Maintenance, iPod, iPhone or iPad

Troubleshooting chart (continued)

■ USB

Symptom	Possible cause
● Device cannot	● Is there any MP3/WMA file
be detected.	available?
	● Is the device properly
	connected?
	● Is it an MTP device?
	● Does the device contain AAC
	file only?
● Playback does	● Is it a copyright protected
not start.	WMA file?
	● Is it a false MP3 file?
● Wrong time	● Is Variable Bitrate file being
display.	played back?
● Wrong file name	● Is the File Name written in
display.	Chinese or Japanese
	characters?

■iPod, iPhone or iPad

Symptom	Possible cause
● No sound is	● The iPod, iPhone or iPad is not
produced.	playing.
No image	● The iPod, iPhone or iPad is not
appears on the	properly connected to the unit.
TV/monitor.	● Is the AC power lead of the
	unit plugged in?
	● The video cable is not properly
	connected.
	● The TV/monitor’s input
	selection is not properly set.
	● The iPod TV out feature has
	not been set to output video.
	● USB terminal do not support
	video.
● iPod, iPhone or	● The iPod, iPhone or iPad is not
iPad will not	making full contact with the
charge.	connector.
	● Using iPod (3rd generation).
	● The iPod or iPhone is not
	supported. Refer to page 9 for
	compatible models.
● “This accessory	● The iPhone battery is low.
is not made to	Please charge the iPhone.
work with	● iPhone is not properly docked.
iPhone” or “This
accessory is not
supported by
iPhone” appears
on iPhone
screen.

■Condensation

Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, etc.) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit.

■If problem occurs

When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.

If such a problem occurs, do the following:

1Set the unit to the stand-by mode and turn the power on again.

2If the unit is not restored in the previous operation, unplug and plug in the unit again, and then turn the power on.

Note:

If neither operation above restores the unit, clear all the memory by resetting it.

■Factory reset, clearing all memory

1Press the ON/STAND-BY button to turn the power on.

2Press the AUDIO/LINE (INPUT) button on the remote control or FUNCTION button repeatedly on the main unit to select LINE IN function.

3In LINE IN function, press the button on the main unit then press and hold the button until “RESET” appears.

Caution:

This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme.

■Before transporting the unit

Remove the iPod, USB memory device and disc from the unit. Then, set the unit to the power stand-by mode. Carrying the unit with iPod or USB memory device left docked or discs left inside might damage the unit.

■Care of compact discs

Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collection and player.

●Do not write on either side of the disc, particularly the non-label side from which signals are read. Do not mark this surface.

●Keep your discs away from direct sunlight, heat, and excessive moisture.

●Always hold the CDs by the edges. Fingerprints, dirt, or water on the CDs can cause noise or mistracking. If a CD is dirty or does not play properly, clean it with a soft, dry cloth, wiping straight out from the centre, along the radius.

NO	YES
	Correct

Maintenance

■Cleaning the cabinet

Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth.

Caution:

●Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the cabinet.

●Do not apply oil to the inside of the unit. It may cause malfunctions.

■Cleaning the CD pickup lens

Poor performance during CD playback (skipping or jumping) can be caused by a dirty or contaminated CD laser pick up lens. If this happens then the use of a commercially available CD lens cleaning disc may restore normal operation. Contact your supplier or local CD software dealer to obtain CD lens cleaning discs. Ensure all included instructions/documentation are carefully followed.

25