Setting the clock (Remote control only) (continued)
5To adjust the hour, press the 
or 
button
and then press the ENTER button. Press the 
or
button once to advance the time by 1 hour. Hold it down to advance continuously.
6To adjust the minutes, press the 
or 
button
and then press the ENTER button. Press the 
or
button once to advance the time by 1 minute.
To confirm the time display:
Press the CLOCK/TIMER button. The time display will appear for about 5 seconds.
Note:
When power supply is restored after unit is plugged in again or after a power failure, reset the clock (pages 8 - 9).
To readjust the clock:
Perform “Setting the clock” from step 2.
To change the
Perform “Setting the clock” from step 2 onwards.
Listening to the iPod, iPhone or iPad
Made for:
●iPod touch (4th generation)
●iPod touch (3rd generation)
●iPod touch (2nd generation)
●iPod touch (1st generation)
●iPod classic
●iPod nano (6th generation)
●iPod nano (5th generation)
●iPod nano (4th generation)
●iPod nano (3rd generation)
●iPod nano (2nd generation)
●iPhone 4
●iPhone 3GS
●iPhone 3G
●iPhone
●iPad
Caution:
Please update your iPod, iPhone and iPad unit to the latest software version before using it. Please visit Apple’s homepage to download the latest version for your iPod, iPhone and iPad.
Notes:
● Charging terminal for iPod, iPhone and iPad:
Condition | DOCK | USB |
USB function | NO | YES |
|
|
|
Other function | YES | NO |
|
|
|
YES | NO | |
|
|
|
● The message “This accessory is not made to work with iPhone” or similar, may appear on the iPhone screen when:
- battery is low.
- the iPhone is not properly docked (eg. slanting). If this occurs, remove and
● This product is made for iPhone. To prevent random interference when iPhone is docked, the headphone output is disabled, and “HP INVALID” will be displayed. You may also experience brief audio interference during incoming calls.
■iPod, iPhone and iPad connection (USB only)
1Insert the connector to the iPod, iPhone or iPad. iPad
Connector
2 Place the iPad to the stand for iPad.
iPad
Stand for iPad
3Connect the iPod, iPhone or iPad to the unit via USB connector.
USB
Note:
USB terminal do not support VIDEO out.
■iPod, iPhone or iPad playback
1Press the
2Press the USB button on the remote control or FUNCTION button repeatedly on the main unit to select USB function.
3Connect iPod, iPhone or iPad to the unit. “USB/iPod” will appear.
4Press the 
/
(CD/USB 
/
) button to start playback.
Note:
Stop button ( 
) is invalid during iPod, iPhone or iPad playback.
■iPod and iPhone connection (Dock only)
Note:
Docking station is not recommended for iPad connection.
Adaptor for iPod and iPhone connection
Notes:
●Please use the adaptor supplied with your iPod or iPhone unit.
●You can use an audio cable to connect your iPod to the AUDIO IN socket if:
1.your iPod adaptor does not fit into the iPod dock on the main unit.
2.you have an iPod that does not have an iPod adaptor.
3.you have an iPod that does not have an iPod 30 pin connector.
9
