System connections (continued)
Make sure to unplug the AC power cord before making any connections.
Video cable | TV |
(not supplied) |
To video input jack
AM loop antenna
Installing the AM loop antenna
<Assembling >
<Attaching to the wall >
LEFT |
RIGHT |
SPEAKERS |
Wire
Plug in with the lever side facing to the left.
FM antenna
External FM antenna for better reception (not supplied)
Wall Screws
(not supplied)
AC outlet
(AC 120 V ~ 60 Hz)
QVolume control
The sound level at a given volume setting depends on speaker efficiency, location, and various other factors. It is advisable to avoid exposure to high volume levels, which occurs while turning the unit on with the volume control setting up high, or while continually listening at high volumes. Excessive sound pressure from earphones and headphones can cause hearing loss.
QSpeaker connection
OUse speakers with an impedance of 4 ohms or more, as lower impedance speakers can damage the unit.
ODo not make a mistake when connecting the right and left speakers. The right speaker is the one on the right side when you face the unit.
OInsert the speaker plug fully with the lever side facing to the left.
OHold the speaker plug when removing it from the unit. Pulling the wire may cause malfunction to the unit.
ODo not allow any objects to fall into or to be placed in the bass reflex ducts.
ODo not stand or sit on the speakers. You may be injured.
Remote control
QBattery installation
Use 2 “AAA” size batteries
Plastic film covering can be removed or peeled off.
1Open the battery cover.
2Insert the batteries according to the direction indicated in the battery compartment.
When inserting or removing the batteries, push them toward the battery terminals.
3Close the battery cover.
Caution:
OReplace all old batteries with new ones at the same time.
ODo not mix old and new batteries.
ORemove the batteries if the unit will not be used for a long period of time. This will prevent potential damage due to battery leakage.
ODo not use rechargeable batteries
OInstalling the batteries incorrectly may cause the unit to malfunction.
OBatteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.