Advanced USB playback | Listening to the radio | |
|
|
|
The following functions are the same as CD operations:
Page Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Random play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Programmed play (MP3/WMA) . . . . . . . . . . . . . . . . . .11
Note:
If USB memory device is not connected, “USB No Media” will be shown on the display.
Notes:
●This unit only supports
●Playback order for MP3 files may differ depending on the writing software used during file download.
●Bitrate which is supported by MP3 is 32~320 kbps, WMA is 64~160 kbps.
●For MP3/WMA files, please put “.MP3” “.WMA” extension. Files cannot be played back if there is no MP3/WMA extension.
●Playlists are not supported on this unit.
●This unit can display Folder Name or File Name up to 32 characters.
●Maximum total number of MP3/WMA files is 999.
●Total number of folders read is 99 including folder with
●The display playback time may not be displayed correctly when playing back a variable bitrate file.
●The ID3TAG information supported are TITLE, ARTIST and ALBUM only. Title name, artist name and album name can be displayed by pressing the DISPLAY button during file playback or pause mode.
●WMA meta tag also supports title, artist and album name which are recorded in WMA files. Copyright protected WMA files cannot be played back.
CD/USB
RDS
■Tuning
1Press the
2Press the TUNER button repeatedly to select FM Stereo or FM Mono.
3Press the TUNING ( 
or 
) button on the remote control to tune in to the desired station.
●Manual tuning:
Press the TUNING ( 
or 
) button repeatedly to tune in to the desired station.
●Auto tuning:
When the TUNING ( 
or 
) button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station.
Notes:
●When radio interference occurs, auto scan tuning may stop automatically at that point.
●Auto scan tuning will skip weak signal stations.
●To stop the auto tuning, press the TUNING ( 
or 
) button again.
●When an RDS (Radio Data System) station is tuned in, the frequency will be displayed first, and then the RDS indicator will light up. Finally, the station name will appear.
●Full auto tuning can be achieved for RDS stations “ASPM”, see page 16.
To receive an FM stereo transmission:
●Press the TUNER button to select stereo mode and “ST” indicator will be displayed. “
” and “ 
” will appear when an FM broadcast is in stereo.
●If the FM reception is weak, press the TUNER button to extinguish the “ST” indicator. The reception changes to monaural, and the sound becomes clearer.
