Sharp XL-UH2440H XL-UH240HBK Listening to the radio continued, E-25, Memorising a station

XL-UH240H

XL-UH240H (BK) Listening to the radio (continued)

XL-UH2440H

ENGLISH

	Memorising a station		To recall a memorised station
You can store 40 AM and FM stations in memory and recall them at		Press the PRESET (		or			) button for less than 0.5 seconds to
the push of a button. (Preset tuning)		select the desired station.
1 Perform steps 1 - 3 in "Tuning" on page 24.			To scan the preset stations
2 Press the MEMORY button to enter the preset tuning		The stations saved in memory can be scanned automatically.
	saving mode.	(Preset memory scan)
		1	Press the PRESET (		or			) button for more than 0.5 seconds.
			The preset number will flash and the programmed stations will be
			tuned in sequentially, for 5 seconds each.
		2	Press the PRESET (			or			) button again when the desired

station is located.

3Within 30 seconds, press the PRESET ( or ) button to

select the preset channel number.

Store the stations in memory, in order, starting with preset channel 1.

Radio	4 Within 30 seconds, press the MEMORY button to store that
	station in memory.
	If the "MEMORY" and preset number indicators disappear
	before the station is memorised, repeat the operation from step
	2.	To erase entire preset memory
	5 Repeat steps 1 - 4 to set other stations, or to change a	1 Press the ON/STAND-BY button to enter the stand-by mode.
	preset station.	2 Whilst pressing down the 1 button and the 5 button, press
	When a new station is stored in memory, the station previously	the TUNER (BAND) button until "TUNER CLEAR" appears.
	memorised for that preset channel number will be erased.
	Note:
	The backup function protects the memorised stations for a few
	hours should there be a power failure or the AC power lead become
	disconnected.

E-25