Notes:
The same station name can be stored in different channels.
In a certain area or during certain time periods, the station names may temporarily be different.
Notes for RDS operation
If any of the following events occur, it does not mean that the unit is faulty:
"PS", "NO PS" and a station name appear alternately, and the unit does not operate properly.
If a particular station is not broadcasting properly or a station is conducting tests, the RDS reception function may not work properly.
When you receive an RDS station whose signal is too weak, information like the station name may not be displayed.
"NO PS", "NO PTY" or "NO RT" will flash for about 5 seconds, and then the frequency will be displayed.
Notes for radio text:
The first 10 characters of the radio text will appear for 4 seconds and then they will scroll across the display.
If you tune in to an RDS station which is not broadcasting any radio text, "NO RT" will be displayed when you switch to the radio text position.
Whilst radio text data is received or when the text contents change, "RT" will be displayed.
To recall stations in memory
To specify programmed types and select stations (PTY search): You can search a station by specifying the programme type (news, sports, traffic programme, etc. ... see pages 29 - 30) from the stations in memory.
1Press the TUNER (BAND) button to select the FM.
2Press the RDS PTY button on the remote control.
"SELECT" and "PTY TI" will appear alternately for about 6 sec- onds.
3Within 6 seconds, press the PRESET (
or 
) button to se- lect the programme type.
Each time the button is pressed, the programme type will ap- pear. If the button is held down for more than 0.5 seconds, the programme type will appear continuously.
4Whilst the selected programme type is flashing (within 6 seconds), press the RDS PTY button again.
After the selected programme type has been lit for 2 seconds, "SEARCH" will appear, and the search operation will start.
ENGLISH
Advanced Features
E-28
8
