Sharp XL-UH4H operation manual Setting the clock, To readjust the clock

XL-UH4H

Setting the clock

Basic Operation

PRESET

In this example, the clock is set for the 24-hour (0:00) display.

1In STAND-BY condition.

2Press the CLOCK/TIMER button for more than 2 seconds.

3Within 10 seconds, press the PRESET ( or ) button to set hour.

4Press the CLOCK/TIMER button again.

5Within 10 seconds, press the PRESET ( or ) button to set minute.

6Press the CLOCK/TIMER button. The clock is set.

To confirm the time display:

Press the CLOCK/TIMER button. The time display will appear for about 5 seconds.

Notes:

To reset the clock if the power fails or is unplugged, the unit must be in the STAND-BY mode.

"0:00" or time will flash when the AC power supply is restored after a power failure or unplugging the unit or when reset button is pressed.

Readjust the clock as follows:

To readjust the clock:

Perform "Setting the clock" from beginning.

14