Sharp XL-UH4H Specifications, „ General, „ Amplifier, „ Usb/Sd, „ CD player, „ Tuner, „ Speaker

Specifications

XL-UH4H

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

„ General

Power source	AC 230 V, 50 Hz
Power	Power on: 26 W
consumption	Power stand-by: 0.6 W(*)
Dimensions	Width: 144 mm (5-11/16")
	Height: 210 mm (8-5/16")
	Depth: 239 mm (9-7/16")
Weight	2.5 kg (5.5 lbs.)

( * )This power consumption value is obtained when the unit is in the power stand-by mode.

„ Amplifier

Output power	RMS: 16 W (8 W + 8 W) (10% T.H.D.)
	RMS: 12 W (6 W + 6 W) (0.9% T.H.D.)
Output terminals	Speakers: 4 ohms
	Headphones: 16 - 50 ohms
	(recommended: 32 ohms)

„ USB/SD

Class	Mass storage class
Support File	MP3/WMA (do not support DRM file)
Format support	FAT 16 or FAT 32
Bitrate support	MP3 (32 ~ 320 kbps)
	WMA (64 ~ 160 kbps)
Other	MP3 lD3 - tag only supports version 1.x
	USB supports version 2.0

„ CD player

Type	Compact disc player
Signal readout	Non-contact, 3-beam semiconductor laser
	pickup
D/A converter	1-bit D/A converter
Frequency	20 - 20,000 Hz
response
Dynamic range	90 dB (1 kHz)

„ Tuner

Frequency range	FM: 87.5 - 108 MHz
	AM: 522 - 1,620 kHz

„ Speaker

Type	2-way type speaker system
	5 cm (2") tweeter
	13 cm (5-1/8") woofer
Maximum input	15 W
power
Rated input power	8 W
Impedance	4 ohms
Dimensions	Width: 135 mm ( 5-5/16")
	Height: 242 mm (9-17/32")
	Depth: 205 mm (8-1/16")
Weight	1.6 kg (3.5 lbs.)/each

References

41