Sharp XL-UH4H Using the Radio Data System RDS, To recall a memorised station, Preset station

XL-UH4HListening to the radio (continued)

3Within 10 seconds, press the PRESET ( or ) button to select the preset channel number.

Store the stations in memory, in order, starting with preset channel 1.

4Within 10 seconds, press the MEMORY/DISP button to store that station in memory.

MEMORY

	If the "MEMORY" and preset number indicators disappear
	before the station is memorised, repeat the operation from step
	2.
Radio	5 Repeat steps 1 - 4 to set other stations, or to change a
	preset station.
	When a new station is stored in memory, the station previously
	memorised for that preset channel number will be erased.
	Note:
	The backup function protects the memorised stations for a few
	hours should there be a power failure or the AC power lead become
	disconnected.
	To recall a memorised station
	Press the PRESET ( or ) button for less than 0.5 seconds to
	select the desired station.

30

Using the Radio Data System (RDS)

RDS is a broadcasting service which a growing number of FM stations provide. These FM stations send additional signals along with their regular programme signals. They send their station names, and information about the type of programme such as sport, music, etc.

When tuned to an RDS station, "RDS" and the station name will be displayed.

Using the Auto Station Programme Memory (ASPM)

Whilst in the ASPM operation mode, the tuner will automatically search for new RDS stations. Up to 20 stations can be stored.

If you have already stored some stations in memory, the number of new stations you can store will be less.

1Press the TUNER (BAND) button to select the FM band.

2Press and hold down the RDS (ASPM/PTY) button on the remote control for at least 3 seconds.

1 Scanning will start (87.50 - 108.00 MHz).

2 When an RDS station is found, "RDS" will appear for a short time and the station will be stored in memory.

RDS

MHz

3After scanning, the number of stations stored in memory will displayed for 4 seconds and then "END" will appear for 4 seconds.

Note:

ASPM auto scan search will auto stop after 1 cycle from 87.50 MHz to 108.00 MHz.