4 Replace the filter holders.

• Align the tabs on the filter holders while replacing them, and then press down on the tabs to lock them in place.

Note

•Be sure the filter holders are securely installed. The power will not turn on unless it is correctly installed.

Replacing the Dust Filters

Info

Reinforcement seal

 

•If the filters become too dirty to clean effectively, purchase new ones (PFILDA025WJZZ) from your nearest Sharp Authorized Projector Dealer or Service Center.

After removing the filter holders (see step 2 of “Cleaning the Dust Filters”), remove the dust filters, then replace with new ones.

•Pick the dust filters up with your fingers and lift them out of the filter holders.

•With the reinforcement seal facing down, place the dust filters underneath the tabs on the filter holders.

Appendix

49