Sharp manual 66

Specifications

Product type	Projector
Model	PG-MB66X/PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L/XR-10S-L
Video system	NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/
	DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50
Display method	Single Chip Digital Micromirror DeviceTM (DMDTM) by Texas Instruments
DMD panel	Panel size:		[PG-MB66X/PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L] 0.55" (14 mm), 1chip XGA DMD
			[XR-10S-L] 0.55" (14 mm), 1chip SVGA DMD
	No. of dots: [PG-MB66X/PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L] 786,432 dots (1,024 [H] ⋅ 768 [V])
			[XR-10S-L] 480,000 dots (800 [H] ⋅ 600 [V])
Lens	[PG-MB66X] 1–1.15 ⋅ zoom lens, F2.4–2.6, f = 18.7–21.5 mm
Projection lamp	[PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L/XR-10S-L] 1–1.15 ⋅ zoom lens, F2.4–2.6, f = 19.0–21.9 mm
	[PG-MB66X/PG-MB56X] 275 W DC lamp (AN-XR20L2)
Component input signal	[XG-MB50X-L/XR-11XC-L/XR-10X-L/XR-10S-L] 220 W DC lamp (AN-XR10L2)
	15-pin mini D-sub connector
(INPUT1/2)	Y: 1.0 Vp-p, sync negative, 75 Ω terminated
	PB: 0.7 Vp-p, 75 Ω terminated
Horizontal resolution	PR: 0.7 Vp-p, 75 Ω terminated
	[PG-MB66X/PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L] 600 TV lines (DTV720P)
Computer RGB input	[XR-10S-L] 520 TV lines (DTV720P)
	15-pin mini D-sub connector
(INPUT 1/2)/output	RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated
(OUTPUT) signal	HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
S-video input signal	VERTICAL SYNC. SIGNAL: Same as above
	4-pin mini DIN connector
(INPUT 3)	Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
	C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
Video input signal	RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
(INPUT 4)	terminated
Vertical frequency	45–85 Hz
Horizontal frequency	15–70 kHz
Pixel clock	12–108 MHz
RS-232C terminal	9-pin mini DIN connector
Audio input signal	ø3.5 mm minijack or RCA terminal: 0.5 Vrms, more than 22 kΩ (stereo)
Audio output signal	ø3.5 mm minijack: 0.5 Vrms, less than 2.2 kΩ
(AUDIO OUTPUT 1-4)	4 cm ⋅ 2.85 cm oval ⋅ 1
Speaker system
Rated voltage	AC 100–240 V
Input current	[PG-MB66X/PG-MB56X] 3.6 A
Rated frequency	[XG-MB50X-L/XR-11XC-L/XR-10X-L/XR-10S-L] 3.0 A
	50/60 Hz
Power consumption		PG-MB66X	350 W (“Bright” mode)/280 W (“Eco + Quiet” mode) with AC 100 V
		PG-MB56X	330 W (“Bright” mode)/270 W (“Eco + Quiet” mode) with AC 240 V
		XG-MB50X-	L/XR-10X-L		298 W (“Bright” mode)/229 W (“Eco + Quiet” mode) with AC 100 V
Power consumption		XR-11XC-L/XR-10S-L			288 W (“Bright” mode)/223 W (“Eco + Quiet” mode) with AC 240 V
	4.7 W (AC 100 V) – 6.1 W (AC 240 V)
(standby)
Heat dissipation		PG-MB66X	1,315 BTU/hour (“Bright” mode)1,050 BTU/hour (“Eco + Quiet” mode) with AC 100 V
		PG-MB56X	1,240 BTU/hour (“Bright” mode)/1,010 BTU/hour (“Eco + Quiet” mode) with AC 240 V
		XG-MB50X-L/XR-10X-L		1,120 BTU/hour (“Bright” mode)/860 BTU/hour (“Eco + Quiet” mode) with AC 100 V
Operating temperature		XR-11XC-L/XR-10S-L		1,080 BTU/hour (“Bright” mode)/840 BTU/hour (“Eco + Quiet” mode) with AC 240 V
	41°F to 95°F (+5°C to +35°C)
Storage temperature	–4°F to 140°F (–20°C to +60°C)
Cabinet	Plastic
I/R carrier frequency	38 kHz
Dimensions (approx.)	12 13/32" ⋅ 4 19/64" ⋅ 11 1/32" (315 (W) ⋅ 109 (H) ⋅ 280 (D) mm) (main body only)
	12 13/32" ⋅ 4 47/64" ⋅ 11 37/64" (315 (W) ⋅ 120 (H) ⋅ 294 (D) mm) (including adjust-
Weight (approx.)	ment foot and projecting parts)
	8.6 lbs. (3.9 kg)
Replacement parts	Remote control, Power cord, RGB cable, 3 RCA to 15-pin D-sub cable, DIN-D-

sub RS-232C adaptor, Operation manual, Dust filter

As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

64