Sharp PG-MB56X, PG-MB66X, XG-MB50X-L, XR-10S-L, XR-10X-L, XR-11XC-L Warning, Removing and Installing the Lamp Unit

Removing and Installing the Lamp Unit

Warning!

•Do not remove the lamp unit from the projec- tor right after use. The lamp and parts around the lamp will be very hot and may cause burns or injury.

Optional

accessory

Lamp unit AN-XR20L2 (for PG-MB66X/ PG-MB56X)

AN-XR10L2

(for XG-MB50X-L/ XR-11XC-L/XR-10X-L/ XR-10S-L)

Info

•Make sure that you remove the lamp unit by the handle. Do not touch the glass surface of the lamp unit or the inside of the projector.

•To avoid injury to yourself and damage to the lamp, make sure you carefully follow the steps below.

•Do not loosen other screws except for the lamp unit cover and lamp unit.

1Press SSTANDBY/ON on the pro- jector or eSTANDBY on the re- mote control to put the projector into standby mode.

•Wait until the cooling fan stops.

2Disconnect the power cord.

•Unplug the power cord from the AC socket.

•Leave the lamp until it has fully cooled down (about 1 hour).

3Remove the lamp unit cover.

•Turn the projector over. Loosen the user service screw (1) that secures the lamp unit cover. Remove the lamp unit cover (2).

STANDBY/ON button

AC socket

1

2

User service screw (for lamp unit cover)

Appendix

53

Contents

MODEL Model No.: Serial No.: ENGLISH INFORMATION Declaration of conformity PRODUCT DISPOSAL Caution Concerning Lamp Replacement Info Note PP. 61 and Preparing Using Reference CAUTION: Page Observe the following safeguards when setting up your projector Page Supplied accessories Projector 27 37 Rear View Page Caution Usable Range Setup and Projection 1. Place the projector facing a wall or a screen 3. Remove the lens cap and turn the projector on 4.Adjust the projected image with the Setup Guide 5.Turn the computer on 6.Select the INPUT mode 7. Correct trapezoidal distortion 8. Turn the Power off Setting up the Projector Standard Setup (Front Projection) Example of standard setup Side View Ceiling-mountSetup Projection (PRJ) Mode Setup Indication of the Projection Image Size and Projection Distance Screen Size and Projection Distance INPUT Terminals and Connectable Main Equipment Connections Page Page Page Page Page Turning the Projector on Turning the Power off (Putting the Projector into Standby Mode) About the Setup Guide Adjusting the Projected Image 1 Adjusting the Focus 2 Adjusting the Picture Size 3 Adjusting the Height Switching the Input Mode Adjusting the Volume Displaying the Black Screen and Turning off the Sound Temporarily Correcting Trapezoidal Distortion BasicOperation Resize Mode Page Auto Sync (Auto Sync Adjustment) Displaying and Setting the Break Timer Freezing a Moving Image Selecting the Picture Mode Page Page Menu Selections (Adjustments) To adjust the projected image while watching it 1Selecting the Picture Mode 2Adjusting the Image 3Adjusting the Color Temperature 4Progressive 5Lamp Setting 1Setting the Resize Mode 2Adjusting the Image Position 3Keystone Correction 4Setting the On-screenDisplay 7Reversing/Inverting Projected Images 5Selecting the Background Image 6Selecting the Setup Guide 8Selecting the On-screenDisplay Language 1Auto Search Function 3Auto Power Off Function 2Auto Sync (Auto Sync Adjustment) 4Setting the Confirmation Sound (System Sound) Adjusting the Projector Function (“PRJ - ADJ” menu) (Continued) 8System Lock Function 7Fan Mode Setting 9Checking the Lamp Life Status Locking the Operation Buttons on the Projector (Keylock Function) Utilizing the “Help” menu func tions Appendix Cleaning the Dust Filters Replacing the Dust Filters Page Page Lamp Caution Concerning the Lamp Replacing the Lamp Caution Warning Resetting the Lamp Timer Page Computer control Communication conditions Basic format Commands Page Page Page Page Page Page Page Units: inches (mm)