Sharp XR-10S, XR-10X, XR-20S, XR-20X 28

Connecting to Video Equipment

The projector is equipped with input terminals that support component, S-video, and video signals. See the illustration below to connect with the audio-visual equipment.

The image quality is highest in the order of the component signal, the S-video signal and the video signal. If your audio-visual equipment has a component output terminal, use the COMPUTER/ COMPONENT terminal (INPUT1 or INPUT 2) on the projector for video connection.

When using a 3 RCA (Component) to 15-pin D-sub cable (INPUT1 or INPUT2)

To audio output terminal

	To component output (Y, CB/PB, CR/PR) terminal	To INPUT1
	DVD, etc.	To INPUT1	To AUDIO
	DVD, etc.	terminal	To AUDIO
			(INPUT1, 2)
			terminal

3 RCA (Component) to 15-pin D-sub cable (optional: AN-C3CP2)

ø3.5 mm minijack to RCA audio cable (commercially available)

When using an S-video cable (INPUT3)

To audio output terminal
To S-video output terminal	DVD, etc.
To S-video output terminal

To AUDIO

To INPUT3 (INPUT3, 4)

terminalterminal

L

R

S-video cable

RCA audio cable (com-(commercially available) mercially available)

24

Contents

MODEL Model No.: Serial No.: Page Page ENGLISH INFORMATION Declaration of conformity PRODUCT DISPOSAL Caution Concerning Lamp Replacement Info Note PP. 59 and Preparing Using Reference CAUTION: Page Observe the following safeguards when setting up your projector Page Supplied accessories Projector 27 37 Rear View Page Caution Usable Range Setup and Projection 1. Place the projector facing a wall or a screen 3. Remove the lens cap and turn the projector on 4.Adjust the projected image with the Setup Guide 5.Turn the computer on 6.Select the INPUT mode 7. Correct trapezoidal distortion 8. Turn the Power off Setting up the Projector Standard Setup (Front Projection) Example of standard setup Side View Ceiling-mountSetup Projection (PRJ) Mode Setup Indication of the Projection Image Size and Projection Distance Screen Size and Projection Distance INPUT Terminals and Connectable Main Equipment Connections Page Page Page Page Page Turning the Projector on Turning the Power off (Putting the Projector into Standby Mode) About the Setup Guide Adjusting the Projected Image 1 Adjusting the Focus 2 Adjusting the Screen Size 3 Adjusting the Height Switching the Input Mode Adjusting the Volume Displaying the Black Screen and Turning off the Sound Temporarily Correcting Trapezoidal Distortion BasicOperation Resize Mode Page Auto Sync (Auto Sync Adjustment) Displaying and Setting the Break Timer Freezing a Moving Image Selecting the Picture Mode Page Page Menu Selections (Adjustments) To adjust the projected image while watching it 1Selecting the Picture Mode 2Adjusting the Image 4Progressive 3Adjusting the Color Temperature 5Lamp Setting 1Setting the Resize Mode 2Adjusting the Image Position 3Keystone Correction 4Setting On-screenDisplay 7Reversing/Inverting Projected Images 5Selecting the Background Image 6Selecting the Setup Guide 8Selecting the On-screenDisplay Language 1Auto Search Function 3Auto Power Off Function 2Auto Sync (Auto Sync Adjustment) 4Setting the Confirmation Sound (System Sound) Adjusting the Projector Function (“PRJ - ADJ” menu) (Continued) 8System Lock Function 7Fan Mode Setting 9Checking the Lamp Life Status Locking the Operation Buttons on the Projector (Keylock Function) Utilizing “Help” menu functions Appendix Page Page Lamp Caution Concerning the Lamp Replacing the Lamp Warning Resetting the Lamp Timer Page Computer control Communication conditions Basic format Commands Page Page Page Page Page Page Page Units: inches (mm)