Troubleshooting with “Help” menu
This function advises you to solve the problems during usage.
Adjustment buttons (P/R/O/Q)
Utilizing “Help” menu functions
MENU/HELP button
ENTER button
Example: When image flickering appears
Operation to solve image flickering when projecting the computer RGB signal.
1
2
3
Press BMENU/HELP.
Press Oor Qto select “Help”, then press hENTER.
Press P or R to select “Vertical stripes or flickering image appears ” on Help menu, then press hENTER.
Picture | SCR - ADJ PRJ - ADJ | Help |
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settings
SEL. | ENTER | END |
|
| Help |
Vertical stripes or flickering image appear
Initiate “Auto Sync” Adjustments.
If there is no change after performing "Auto Sync" adjustments, adjust the following items.
Adjust vertical noise
Adjust horizontal noise
Reset the 2 items above
Return
Cur. sig. freq: H 43 kHz / V 60 Hz
SEL. | ENTER | END |
4 Select “Initiate “Auto Sync” Adjustments ”, then press hENTER.
5 If the image is not improved, select “Adjust horizontal noise.”, then press hENTER.
6 | Press O or Q to adjust. |
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
| Help |
| ||
|
|
| Phase | 0 |
|
|
|
|
|
|
|
|
|
|
| SEL./ADJ. | Rtn. Menu | END |
| ||||||
|
| |||||||||||
Note
•You can adjust the items with check marks (✔).
•The items in the “Help” menu change, de- pending on the input signal or setting that you have selected.
•If the problem is not solved, refer to “Troubleshooting”. (see pages 59 and 60)
•When selecting “sRGB” in "Picture Mode”, the item “Color is faded or poor” is not displayed. This means you cannot change input signal types.
46