Sharp XR-10S, XR-10X, XR-20S, XR-20X 1Selecting the Picture Mode

Picture Adjustment (“Picture” menu)

						Menu operation n Page 37
Q Example: “Picture” screen menu for				Q Example: “Picture” screen menu for
	INPUT 1 (RGB) mode				INPUT 3 mode
	Picture	SCR - ADJ PRJ - ADJ	Help		Picture	SCR - ADJ PRJ - ADJ	Help
	Picture Mode	Standard			Picture Mode	Standard
	Contrast	0			Contrast	0
	Bright	0			Bright	0
	Red	0			Color	0
	Blue	0			Tint	0
	CLR Temp	7 5 0 0 K			Sharp	0
	Bright Boost	1			CLR Temp	7 5 0 0 K
	Lamp Setting	Bright			Bright Boost	1
	Reset				Progressive	3D Progressive
					Lamp Setting	Bright
	SEL./ADJ.	ENTER	END		Reset
					SEL./ADJ.	ENTER	END

1Selecting the Picture Mode

Selectable items	Description	The default settings of each item when selecting Picture Mode
		CLR Temp	Bright Boost	Lamp Setting
Standard	For standard image	7500K	1	Bright
Presentation	Brightens portions of image for	7500K	2	Bright
	more enhanced presentations.
Movie	Gives natural tint to the	6500K	0	Eco + Quiet
	projected image.
Game	Gives sharpness to the	7500K	2	Bright
	projected image.
*sRGB	For high fidelity reproduction of	–	–	Bright
	images from a computer.

•“sRGB” is displayed only when RGB signal is input.

•You can set or adjust each item in the “Picture” menu to your preference. Any changes you make are retained in memory.

Note

•You can also press G PICTURE MODE on the remote control to select the picture mode. (See page 34.)

•*sRGB is an international standard of color reproduction regulated by the IEC (International Electrotechnical Commission). As the fixed color area has been decided by the IEC, the images are displayed in a natural tint based on an original image, when “sRGB” is selected.

For additional information about the sRGB function, visit “http://www.srgb.com/”.

You cannot set the items, “Red”, “Blue”, “CLR Temp”, “Bright Boost”, when “sRGB” is selected.

Info

•When “sRGB” is selected, the projected image may become dark, but this does not indicate a malfunction.

Features Useful

39