Problem

Check

Page

 

 

 

The cooling fan

• When temperature inside the projector increases, the cooling fan runs

–

becomes noisy.

faster.

 

 

 

 

The lamp does not light up

• The lamp indicator is illuminating in red.

22, 48, 51

even after the

Replace the lamp.

 

projector turns on.

 

• The lens shutter is opened fully.

 

 

 

The lamp suddenly turns off

 

 

 

during projection.

 

 

 

 

 

The image sometimes

• Cables are incorrectly connected to the projector or the connected equip-

18-21

flickers.

ment works improperly.

 

 

• If this happens frequently, replace the lamp.

51

 

 

 

The lamp needs much time

• The lamp will eventually need to be changed.

51

to turn on.

While the remaining lamp life draws to a close, replace the lamp.

 

 

 

 

Picture is dark.

 

 

 

 

 

One Touch Play is not

• Non-Sharp Video Products are connected.

45

enabled.

One Touch Play function may not work when the projector is connected

 

 

to non-Sharp Video Products.

 

 

 

 

 

• An HDMI cable is not used for connection between the projector and the

19

 

Sharp Video Products.

 

 

One Touch Play function is enabled when the projector is connected to

 

 

the Sharp Video Products with an HDMI cable.

 

 

 

 

 

• One Touch Play function of the projector is not set to “On”.

45

 

 

 

 

• CEC settings of connected Sharp Video Products or other CEC devices

–

 

are incorrect.

 

 

 

 

 

• One Touch Play is set to “Off” and disabled when the Economy mode is

45

 

set to “On”.

 

 

 

 

System Standby is not

• Non-Sharp Video Products are connected.

45

enabled.

System Standby function may not work when the projector is connected

 

 

to non-Sharp Video Products.

 

 

 

 

 

• An HDMI cable is not used for connection between the projector and the

19

 

Sharp Video Products.

 

 

System Standby function is enabled when the projector is connected to

 

 

the Sharp Video Products with an HDMI cable.

 

 

 

 

 

• System Standby function of the projector is not set to “On”.

45

 

 

 

 

• CEC settings of connected Sharp Video Products or other CEC devices

–

 

are incorrect.

 

 

 

 

A response code cannot be

• In the case of transmitting RS-232C commands from a computer during

54

received when the

standby, it takes a maximum of 30 seconds for the computer to receive

 

projector was attempted

the response code. Set the response code waiting time of the computer

 

to be controlled using

to 30 seconds or more.

 

RS-232C commands from

 

 

a computer during standby.

 

 

 

 

 

The remote control

• Operate the remote control while pointing it at the projector’s remote

12

cannot be used.

control sensor.

 

 

• The remote control may be too far away from the projector.

12

 

• If direct sunlight or a strong fluorescent light is shining on the projector’s

12

 

remote control sensor, place the projector where it will not be affected by

 

 

strong light.

 

 

 

 

 

• The batteries may be depleted or inserted incorrectly. Make sure the bat-

12

 

teries are inserted correctly or insert new ones.

 

 

 

 

This unit is equipped with a microprocessor. Its performance could be adversely affected by incorrect operation or interference. If this should happen, unplug the unit and plug it in again after more than 5 minutes.

Appendix

-59

Page 60 Page 62
Page 61
Image 61
Sharp XV-Z15000 operation manual Replace the lamp
Page 60 Page 62

XV-Z15000 specifications

The Sharp XV-Z15000 is a high-performance DLP home theater projector designed for cinephiles and enthusiasts looking for an immersive viewing experience. Launched to cater to the demands of home entertainment, it packs several advanced technologies that elevate picture quality and overall performance.

One of the standout features of the XV-Z15000 is its high brightness of 1500 ANSI lumens, which makes it suitable for use in various lighting conditions. This ensures that even in less-than-ideal lighting, the images remain vibrant and clear. The projector also boasts a native contrast ratio of 2000:1, enhancing the depth and richness of the colors and blacks in the displayed image.

The XV-Z15000 uses DLP technology, which is known for its superior color accuracy and sharp resolution. With a native resolution of 1920 x 1080, it enables full HD viewing, ideal for movies, games, and presentations. This is complemented by Sharp's proprietary image processing algorithms that help to reduce artifacts and improve the overall viewing quality.

Another notable characteristic is the inclusion of Sharp’s advanced Color Management System (CMS). This feature allows for precise adjustments of color levels and saturation, ensuring that the projector meets the unique viewing preferences of users. Additionally, the XV-Z15000 supports both 2D and 3D content, expanding its versatility for different types of media.

Connectivity is made easy with multiple input options, including HDMI, component video, and composite video, enabling seamless integration with various devices, such as Blu-ray players, gaming consoles, and computers. The built-in speaker provides additional convenience, although users may prefer to connect external audio systems for a more immersive experience.

Furthermore, the XV-Z15000 incorporates an eco-friendly design with a long lamp life of up to 3000 hours, which translates into reduced maintenance costs and a lower environmental footprint. With a compact and sleek design, it easily fits into most home theater setups without taking up excessive space.

In summary, the Sharp XV-Z15000 is a well-rounded high-definition projector that combines advanced DLP technology with user-friendly features and eco-conscious design. It offers a powerful blend of brightness, color accuracy, and resolution, making it an excellent choice for anyone looking to elevate their home theater experience. Whether for watching movies, playing video games, or giving presentations, the XV-Z15000 delivers impressive performance tailored to diverse needs.
Top Page Image Contents