Sharper Image EVSI-HTR70 instruction manual Technical Specifications

Models: EVSI-HTR70

1 6
Download 6 pages 52.67 Kb
Page 3
Image 3

This heater is not intended for use in bathroom, laundry areas and similar moist indoor locations. Never locate heater where it may fall into a bathtub or other water container.

Do not run cord under carpeting. Do not cover cord with throw rugs, runners or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic areas where it can be tripped over.

To disconnect the heater, first turn controls to the OFF position, then remove plug from outlet.

Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.

To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surface, like a bed, where openings may become blocked.

A heater may have hot and arcing sparking parts inside. Do not use it in the areas where gasoline, paint, or flammable liquids are used or stored.

Use this heater only for its intended use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.

Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocate power tap (outlet/power strip).

CAUTION: Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord, the cord should be No.14 AWG minimum size and rated not less than 1875 watts.

• DO NOT use outdoors.

SAVE THESE IMPORTANT INSTRUCTIONS FOR EASY REFERENCE

TECHNICAL SPECIFICATIONS

Input Voltage

120V

 

 

Rated Frequency

60 Hz

 

 

Power

1500 Watts

 

 

Weight

3.62 lbs

 

 

Noise Level

<50dB

 

 

Unit height

25.43 inches

 

 

Oscillation

85 degrees side to side

 

 

Remote Control Battery

CR2032 3V

 

 

4

5

Page 3
Image 3
Sharper Image EVSI-HTR70 instruction manual Technical Specifications