OPERATING INSTRUCTIONS
Turning the Unit On
•Check that neither the appliance nor the power cord has been damaged .
•Place the heater on a firm level surface.
•Connect the power cord into a standard AC outlet. The heater will beep twice to confirm the connection.
1. Main switch (on the back side of the device)
•To turn the heater on, flip the main switch to the ON position. When the main switch is flipped to the ON position, the heater will initially be OFF until the ON/OFF 
button is pressed on the touch screen.
•The heater will beep twice indicating that the heater is ready for use.
•Press ON/OFF 
button on the touch screen.
•NOTE: Every time a command is pressed on the touch screen, the heater will emit a small beep and the appropriate symbol will light up confirming the selection.
2. On/Off and Heat Settings
•Turn the heater ON by pressing the ON/OFF 
button on the touch screen. Every time the heater is turned on it will be operating as follows: LOW heat, timer OFF, and oscillation OFF.
•Once the heater is ON, press HEAT 
button to select heat setting. Press HEAT 
button once to select HIGH heat. Press HEAT 
button again to return to LOW heat. Either the HIGH or LOW symbol will light up depending on the heat setting selected.
•To turn the heater OFF, simply press ON/OFF 
button.
3. Oscillation
•To activate the oscillation, press OSCILLATE 
button on the touch screen. The heater will oscillate 85 degrees side to side. The oscillation symbol
will light up when the heater is oscillating.
•To turn the oscillation off, press OSCILLATE 
button. The oscillation symbol 
will no longer be seen on the screen.
4. Timer
There are four possible timer settings: 0.5 hours, 1 (one) hour, 2 (two) hours and 8 (eight) hours. To activate the timer and select a time setting, press TIMER 
button on the touch screen. Each time the TIMER 
button is pressed, it will switch between settings in a repeating cycle as follows: 0.5 hours, 1 hour, 2 hours,
8 hours, OFF. Press again and the cycle begins again. The selection will light up on the screen matching the time period. When the timer is OFF, no selections will be lit.
5. Tip-Over Auto Shut Off
If you tilt the heater at least 40 degrees to the side, you will hear a click sound. This is the Auto Shut Off safety feature that will power the heater OFF if it is knocked over. Once the heater is again positioned upright with the base on a firm, flat surface, the heater will resume power.
6. Overheat Protection
The heater is equipped with a resettable heat fuse, which is activated and powers the heater OFF if it overheats. If this occurs, disconnect the heater from the AC power outlet. As soon as the heater cools down, connect it to the AC power outlet and you may turn it on again.
This heater is also equipped with a
8 | 9 |
|
