Rear panel view of model 7/2100A
Rear panel view of model 5/5210A showing nonfunctional channels in shaded areas
amplifier, it is recommended that wherever pos- sible you use the XLR Input for your connection.
4.Your amplifier includes a 12V DC trigger input connector to allow for remote integration with your preamp/control center. If your preamp includes provision to output 12V DC to remotely turn on other equipment, you can use a control cable to connect the preamp to the trigger input of your amplifier to allow it to automatically turn on when- ever you turn on your preamp. We recommend that a shielded coaxial cable be used for this pur- pose. A removeable plug at the 12V trigger input
(comes with the amplifier) shall be unplugged and wired with the 12V in the correct polarity. The in- put impedance of the 12V input is 2.2k ohms; it will accept an input voltage from 9V to 12V.
5.It is strongly advised that you only use the power cords supplied with the amplifier. Never use any other power cords with a smaller gauge than the one provided. Do not use an extension cord to in- stall your amplifier since it could effectively re- duce the current capacity supplied to the amplifier.
3
