Sherwood P-965 manual Room 2 Source Playback, Press the Room 2 button

ROOM 2 SOURCE PLAYBACK

•This function allows enjoying one source in the main room and playing another in a different room at the same time.

•The analog signals from the 8 CH DIRECT inputs and TAPE MONITOR INs cannot be output from the VIDEO 2 / ROOM 2(audio) OUTs and the digital signals from the USB terminal cannot be output from the COAXIAL DIGITAL OUT, meaning no playback in a different room.

•When you connect the multi-room system kit to the IR IN jack of this unit, you can control this unit with not only the universal remote control unit but also the ROOM 2 remote control unit in a different room, too.

(For details, refer to “CONNECTING MULTI-ROOM SYSTEM KIT” on page 12 and “ROOM 2 Remote Controls” on page 22.)

CAUTION : Even when the ROOM 2 function is deactivated, if the VIDEO 2 OUT is set to On, the signals of the selected source as a main room source will be output from the VIDEO 2/ROOM 2 OUTs.(For details, refer to “When selecting the VIDEO 2 OUT” on page 55.)

When using the ROOM 2 remote control unit					When using the universal remote control unit or the
• You can use the ROOM 2 function with the ROOM 2					buttons on the front panel.
remote control unit more conveniently.					1	Press the ROOM 2 button.
1	Press the ROOM 2 button.	ROOM2
						STANDBY		POWER ON
							AUD2
							SLEEP	D/A
							DIMM	S.A/B
							ROOM2	SUR.B
						or	T.TON	PURE
• “R2” lights up and “(R2)~” is displayed for several							OSD	PARA.
							PAGE1
seconds and the ROOM 2 function is activated.
• To cancel the ROOM 2 function, press it again.
Then “R2” goes off.					• “R2” lights up and “(R2)~” is displayed for several seconds
• In the operating mode, when one of the ROOM 2					and the ROOM 2 function is activated.
INPUT SELECTOR buttons on this remote control					• To cancel the ROOM 2 function, press it again.
is pressed, the ROOM 2 function is automatically					Then “R2” goes off.
activated without pressing the ROOM 2 button and					• You can cancel the ROOM 2 function with using these
the desired input is selected.					buttons even in the standby mode.
2	Select the desired				2	Select the desired input as a ROOM 2 source
	input as a ROOM 2	PHONO	CD	TUNER		while displaying “(R2)~”.
	source.	AUX
				AUDIO
		VIDEO 1	VIDEO 2	VIDEO 3
		VIDEO 4	VIDEO 5	VIDEO 6
• The selected ROOM 2 source is				VIDEO
displayed for several seconds as
follows: (R2) PHONO, (R2)
TUNER, (R2) CD, (R2) AUX, (R2) VIDEO 1~6.
• Only these sources can be played in another room.
• When an audio program source is selected, as a ROOM 2
source, the image of the video program source selected
previously can be played separately, too. (For details, refer					• The selected ROOM 2 source is displayed for several
to “ SETTING THE ROOM2 FEED SETUP” on page 64.)					seconds.
• The MUTE and VOLUME UP/DOWN( /		) buttons on			• Only while displaying “(R2)~”, the volume level for the
this remote control can be available only when the ROOM 2					ROOM 2 source can be adjusted.
function is operating.					• When “(R2)~” is not displayed, press the ROOM 2 button
Note:					briefly twice.

•When the muting effect for the ROOM 2 source is operating, “MUTE” is flickering.

Start play on the component related to the	Start play on the component related to the
3 ROOM 2 source.	3 ROOM 2 source.

Notes:

•When the pure audio function is activated for the main room source, the video signals of the ROOM 2 source cannot be output, too.

•Even when this unit enters the standby mode, in such a case that “R2” lights up still and the STANDBY button lights up in blue as it does in the operating mode, meaning only the ROOM 2 circuitry operates, the ROOM 2 source can be played independently.

•When the ROOM 2 function is operating in the standby mode, only the ROOM 2 remote control unit is available.

•When you do not use the ROOM 2 function, cancel the ROOM 2 function to save electricity.

•For ROOM 2 volume adjustment, refer to “SETTING THE ROOM 2 FEED SETUP” on page 64.

ENGLISH

41