Sherwood R-325 operating instructions Installation, Connections

Please make the following connections (where applicable).

Notes!

–SWITCH OFF THE RECEIVER BEFORE MAKING ANY CONNECTIONS.

–Do not connect the receiver to the AC outlet when making connections.

–Be sure to connect the white plugs to the L (left) and the red plugs to the R (right) jacks when making connections.

INSTALLATION

Important note for connecting equipment that does not have IN/OUT markings on the input and output jacks:

R-325	Device to be connected e.g. cassette deck.
PLAY	PLAY or OUT
REC	REC or IN

ENGLISH

FM

(OUTDOOR ANTENNA)

AM

FM

(INDOOR ANTENNA)

1 2 3 4 7 12 8 9 10 13

300ohm feeder

SUPPLIED ADAPTOR

GND

AM

LOOP

FM

75Ω

VIDEO

MON.

OUT

ANTENNA

PLAY

VCR1

REC

CENTERSPEAKER(8Ω)

	REARSPEAKERS(4Ω)
PHONO	R	L	+
CD	+	+
MULTI	-	-	-
ROOM
AUX/TV

		FRONT SPEAKERS(8~16Ω)
PLAY	DIGI-LINK	L
TAPE	R
MON.		A
REC

+--+

L

B

		R
L	R	SUB	FRONT	FRONT	CENTER	REAR
		WOOFER	PRE-OUT	MAIN-IN	PRE-OUT	PRE-OUT
		PRE-OUT

AC INPUT ~120V /60Hz 2.3A

SER.NO

MODEL NO. R-325

AUDIO/VIDEO RECEIVER

AC OUTLET

SWITCHED

-120V/60Hz

1A MAX 100W

5 6 11 14

CONNECTIONS

1.FM INDOOR ANTENNA

Connect the supplied antenna to the FM antenna terminals, as shown.

Change the position of the antenna until you get the best reception of your favorite FM stations.

FM OUTDOOR ANTENNA

A 75Ω outdoor FM antenna may be used to further improve the reception.

Disconnect the indoor antenna before replacing it with the outdoor one.

2.AM LOOP ANTENNA

Tune in your favorite AM station and position the loop antenna for best reception. Try other stations and find the position that gives best overall reception. When this unit is mounted in a rack or placed on a shelf with insufficient space behind, hang the antenna on a wall in the direction which gives best reception.

3.SYSTEM GROUND TERMINAL

When using a turntable, connect the ground lead from your TURNTABLE to this terminal.

4.AUDIO IN/OUT

–PHONO IN – input jacks for connecting a turntable. Connect these jacks to the output jacks of a turntable with MM (Moving Magnet) type cartridge.

–CD IN – input jacks for connecting a Compact Disc player.

Connect these jacks to the OUTPUT jacks of the CD player.

CONNECTIONS

–AUX/TV IN – input jacks for connecting the fixed audio output jacks of a TV set or any other source you want to hear; an additional CD player or a cassette deck.

–TAPE MON PLAY/REC – play and rec jacks for connecting a cassette deck, a Digital Compact Cassette deck or another digital recording device.

Connect the PLAY jacks to the PLAY or LINE OUTPUT jacks of the deck.

These jacks may also be connected to the LINE OUTPUT jacks of an audio processor such as an optional graphic equalizer or a Digital Signal Processor. Connect the REC jacks to the REC or LINE INPUT jacks of the deck.

These jacks may also be connected to the LINE INPUT jacks of an audio processor such as an optional graphic equalizer or a Digital Signal Processor.

–VCR 1 PLAY/REC – play(input) and rec(output) jacks for connecting the audio OUTPUT and INPUT jacks of a Hi-Fi stereo VCR.

Connect the PLAY jacks to the AUDIO PLAY or OUTPUT jacks of the VCR.

Connect the REC jacks to the AUDIO REC or INPUT jacks of the VCR.

Note : The audio and video inputs and outputs of the VCR must be connected to allow the

VCR 2/CAMCORDER inputs on the front of the receiver to be used for recording input.

3