Sherwood R-325 Remote Function Overview, English, Amplifier, Input Selectors, Tuner, Equalizer

REMOTE FUNCTION OVERVIEW

AMPLIFIER

11.POWER – for power control of this receiver or system. (as described in amplifier chapter titled "POWER ON/STANDBY")

12.SLEEP – for setting a time period after which the system will automatically be switched to standby.

14.SYSTEM DISPLAY – for dimming displays of Sherwood components connected by DIGI LINK II or III.

12.INPUT SELECTORS

35.MUTE – for decreasing the volume.

SURROUND PROCESSOR

28.SURROUND MODE

DOLBY PRO LOGIC, DOLBY 3 STEREO, THEATER, HALL, SIMULATED, OFF – For selecting the different surround modes.

29.CENTER MODE – for selecting the desired center mode when in Dolby Pro Logic or Dolby 3 Stereo mode.

30.TEST TONE – for checking the output level of the front, center and rear speakers.

31.DELAY TIME – for adjusting the delay time of the rear channel.

32.REAR LEVEL / – for adjusting the rear level (in Dolby Pro Logic, Theater, Hall, Simulated mode)

33.CENTER LEVEL / – for adjusting the center level (only in normal mode or wide mode).

34.MASTER VOLUME / – for adjusting the volume.

TUNER

13.PRESET SCAN – for scanning the stations memorized in memory.

15.0-9 DIGITS – for selecting stations in frequency direct mode and for preset tuning in tuner mode.

CASSETTE DECK

15.– for stopping recording/play.

16.– for interrupting recording/play.

17.DECK SELECTOR A, B – for selecting deck A or B.

18.– for recording.

19.– for starting forward side play.

20.– for starting reverse side play.

21.– for winding the tape forward.

22.– for winding the tape reverse.

In the DIGI LINK III remote control system, lf pressing PLAY on CD or TAPE monitor is selected antomatically without selecting the input and PLAY, etc. starts.

COMPACT DISC PLAYER

15.0-9 DIGITS – for track selection, press desired button among 10 buttons on the remote control and for disk selection, select disc No.(1~5) within 2 sec. after pressing the DISC button.

16.DISC (CD changer only) – for disc selection.

17. – to begin play.

18. – to stop play/clearing a program.

19. – for pausing play.

10.– for skipping backward and forward.

11.– for searching backward and forward.

13.INTRO – to preview each track only for 10 seconds.

14.REPEAT A <> B – to play a specific passage repeatedly.

EQUALIZER

23.PRESET – for selecting equalizer pattern.

24.USER – for adjusting equalizer pattern as desired.

25.FILE – for selecting desired equalizer pattern in the preset or user mode.

26.TAPE M – for monitoring the sound of recording or playback of cassette desk.

27.DISPLAY – for selecting equalizer display.

ENGLISH

7