Memorizing the adjusted channel levels
•You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want.
1. After performing the steps 1 ~ 4 in "Adjusting the current channel level" procedure on page 28, press the (MEMORY/) ENTER button.
•The "1" of "REF 1" indication flickers for several seconds.
2. Select the desired one of REF 1 and REF 2.
•If the preset memory disappears, perform the above step 1 again.
3. Confirm your selection.
•The adjusted channel levels have now been memorized into the selected memory.
Recalling the memorized channel levels
1. Press the CHANNEL LEVEL button.
•"REF 1" (or "CAL") is displayed for several seconds.
•If the channel level mode display disappears, press this button again.
2. Select the desired one of REF 1 and REF 2.
•Then the channel levels memorized into the selected preset memory are recalled.
ENGLISH
29
