Troubleshooting Guide

If a fault occurs, run through the table below before taking your receiver for repair.

If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you repair the receiver yourself as this will invalidate the guarantee!

PROBLEM

POSSIBLE CAUSE

REMEDY

 

 

 

No power

The AC input cord is disconnected.

Connect cord securely.

 

Poor connection at AC wall outlet or the

Check the outlet using a lamp or another

 

outlet is inactive.

appliance.

 

 

 

No sound

The speaker cords are disconnected.

Check the speaker connections.

 

The master volume is adjusted too low.

Adjust the master volume.

 

The MUTE button is pressed to ON.

Press the MUTE button to cancel the

 

 

muting effect.

 

Speakers are not switched on.

Press the SPEAKER ON/OFF switch to

 

 

ON.

 

The digital input is not selected correctly

Select the digital input correctly.

 

Incorrect selection of input source.

Select the desired input source correctly.

 

Incorrect connections between the

Make connections correctly.

 

components.

 

 

 

 

No sound from the rear

Surround mode is switched off.

Select a surround mode.

speakers

Master volume and rear level are too

Adjust master volume and rear level.

 

low.

Select a stereo or surround source.

 

Monaural source is used.

 

Dolby 3 Stereo mode is selected.

Select the desired surround mode.

 

 

 

No sound from the center

Dolby DIGITAL(AC-3), Dolby Pro Logic

Select the desired surround mode.

speaker

or Dolby 3 Stereo mode is not selected.

Adjust master volume and rear level.

 

Master volume and center level are too

 

low.

 

 

 

 

Stations cannot be received

No antenna is connected.

Connect an antenna.

 

The desired station frequency is not

Tune in the desired station frequency.

 

tuned in.

Move antenna and retry turning.

 

Antenna is in wrong position.

 

 

 

Preset stations cannot be

An incorrect station frequency has been

Memorize the correct station frequency.

received

memorized.

Memorize the stations again.

 

The memorized stations are cleared.

 

 

 

Poor FM reception

No antenna is connected.

Connect an antenna.

 

The antenna is not positioned for the

Change the position of the antenna.

 

best reception.

 

 

 

 

Continuous hissing noise

Weak signals.

Change the position of the antenna.

during FM reception,

 

Install an otudoor antenna.

especially when a stereo

 

 

broadcast is received.

 

 

 

 

 

Cnotinuous or intermittent

Noise is caused by motors, fluorescent

Keep the receiver away from noise sources.

hissing noise during AM

lamps or lightning, etc.

Install an outdoor AM antenna.

reception, especially at night.

 

 

 

 

 

Remote control unit does not

Batteries are not loaded or exhausted.

Replace the batteries.

operate.

The remote sensor is obstructed.

Remove the obstacle.

 

 

 

Other system components do

DIGI LINK connections are not made

Make proper DIGI LINK connections.

not react to remote control

properly.

 

commands.

 

 

 

 

 

ENGLISH

23

Page 23
Image 23
Sherwood R-925 operating instructions Troubleshooting Guide, Problem Possible Cause Remedy

R-925 specifications

The Sherwood R-925 is a versatile and robust receiver that has made a significant impact in the home audio market. Known for its excellent performance and reliable build quality, it appeals to both audiophiles and casual listeners alike. The R-925, a part of Sherwood’s esteemed lineup, has been designed to deliver high-fidelity sound, along with multiple modern features that enhance the listening experience.

At its core, the Sherwood R-925 boasts a powerful amplifier section. The unit is equipped with a capable output power rating, allowing it to drive a wide range of speakers efficiently. Users can expect clear, dynamic sound reproduction across various genres, from classical to rock. To make the most of its power, the receiver features a robust power supply and high-quality components that reduce distortion and promote clean audio signals.

One of the standout features of the R-925 is its built-in radio tuner. With compatibility for both AM and FM bands, listeners can easily access a plethora of radio stations. The tuner is designed to provide sharp reception and clarity, with presets allowing users to save their favorite stations for easy access.

The R-925 also includes multiple audio inputs, supporting various sources such as CD players, turntables, and streaming devices. This flexibility allows users to integrate the receiver into their existing audio systems seamlessly. Additionally, the receiver features sound-enhancing technologies, such as a sophisticated equalizer that enables users to fine-tune their audio output to match personal preferences or room acoustics.

Another noteworthy characteristic is the user-friendly interface. The R-925 is equipped with a well-organized front panel with ergonomic controls, allowing for easy navigation through options and settings. This intuitive design is coupled with a clear LED display that provides visual feedback on the currently selected source and audio settings.

Incorporating high build quality with a classic aesthetic, the Sherwood R-925 fits neatly into any home setup. It is designed to blend style and functionality, making it a popular choice among home audio enthusiasts. Overall, the Sherwood R-925 offers a compelling package that combines powerful performance, modern features, and user-friendly operation, establishing itself as a worthy contender in the world of audio receivers.