Sherwood R-925 operating instructions Presetting radio stations, Tuning to preset stations

Presetting radio stations

You can store up to 30 preferred stations in the memory.

Tune in the desired station with auto or

3 manual tuning, etc.

Press the MEMORY/ENTER button.

4 MEMO / ENTER

“MEMORY” is flickering for 5 seconds.

Enter a preset number (1~30).

5

Examples)	3	or
For “3” :			3
	within 2 seconds
For “15” :	1	5	or	within 2 seconds
				1	5

The station has now been stored in the memory A stored frequency is erased from the memory by storing another frequency in its place.

If “MEMORY” goes off, press the MEMORY/ENTER button again to enter a preset number.

Tuning to preset stations

Press the desired preset number.

2

Example)

For “3” :	3	or
			3
	within 2 seconds
For “15” :	1	5	or	within 2 seconds
				1	5

When pressing the numeric buttons on the front panel without selecting the TUNER, the tuner will be selected automatically and the preset station will be tuned in.

Listening to FM stereo broadcasts

While listening to FM broadcasts.

FM MODE

Each time this button is pressed, the FM mode changes as follows;

Stereo mode : “ST” lights up

Mono mode : “ST” goes off

When FM stereo broadcasts are poor because of weak broadcast signals, select the FM mono mode to reduce the noise, then FM broadcasts are reproduced in monaural sound

Scanning preset stations in sequence

1

P. SCAN

The receiver will start scanning the stations in the preset sequence and each station is received for 5 seconds.

At the desired station, press this button

2 again to stop scanning.

MEMORY BACKUP FUNCTION

The following items, set before the receiver is turned off, are memorized.

If the electricity fails or the AC input cord is disconnected for about 2 weeks, they are all cleared. So you should memorize them again.

•INPUT SELECTOR settings

•VCR 1 RECORD settings

•Surround mode settings

•Preset stations

•Video labels, etc.

ENGLISH

17