Sherwood RX-5502 manual Connecting Speakers, Switched Ac Outlet, Ac Input Cord

RX-5502(G)2007.8.174:33PM페이지6

4. CONNECTING SPEAKERS

• You can connect up to four pairs of speakers to this receiver and select the various combinations of speakers according to your tastes.

• The speakers C and D can be installed in the main room as the speakers A and B can or in the another room (ROOM2) for ROOM2 playback. (For details, refer to "ROOM2 PLAYBACK" on page 21.)

• Be sure to connect speakers firmly and correctly according to the channel (left and right) and the polarity (+ and -).

• If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connection is incorrect, the sound will be unnatural and lack bass.

�Notes :

• For safe amplifier operation, use the speakers with impedance of over 8Ω when you connect a pair terminals of SPEAKER A and B terminals or/and a pair terminals of SPEAKER C and D terminals and use the speakers with impedance of over 16Ω when you connect both SPEAKER A and B terminals or/and both SPEAKER C and D terminals.

• Do not let the bare speaker wires touch each other or any metal part of this receiver. This could damage this receiver and/or the speakers.

5. SWITCHED AC OUTLET

• This outlet is switched on (power-on mode) and off (standby mode) according to power control as follows (Maximum total capacity is 100 W (0.43A)).

Standby mode - Switched AC outlet off

Power-on mode - Switched AC outlet on

6. AC INPUT CORD

• Plug the cord into an wall AC outlet.

6