Zooming In/Out a Scene, Bookmark Playback

Zooming In/Out a Scene

•In the Zoom-in mode only, you can select and view any part of the scene close-up..

1During playback or in the still piccture or the pause mode, press the ZOOM button.

•Each time this button is pressed, zoom scale or zoom mode changes as fllows:

•The unit zooms in to the center part of the scene.

•In the zoom on mode

•Each time the button is pressed, zoom scale changes as follows

2Only while zooming in a scene, press the

CURSOR / /	buttons to select the desired
part of the scene.

•To return to the previous operation status, press the ZOOM button repeatedly until the zoom play back is canceled.

Notes

•The zoom function may not work with some discs or files.

•The zoom function may not work properly at some scenes.

•Zooming is not possible at a title or DVD menu, etc.

•The bookmark function allows you to mark the desired scene/point that you can go to quickly.

Up to 10 bookmarks can be stored in the memory.

•Then the bookmark menu is displayed on the TV screen.

•When the MARKER button is pressed again, the bookmark menu disappears.

2Press the CURSOR buttons to select the mark mode.

•Each time the CURSOR or button is pressed, the mark mode or the recall mode is selected.

3Press the CURSOR / buttons to select the desired bookmark number.

4At the desired scene/point, press the ENTER button.

•Then the bookmark is stored in the memory.

•Repeat the above steps 1~4 until the desired scenes/points are marked.

•When the ENTER button is pressed at a previously used bookmark number, the new scene/point will be marked with that bookmark.

1To select the recall mode, perform the above steps 1 and 2.

2Press the CURSOR / buttons to select the bookmark number that you want to recall and press the ENTER button.

•Playback resumes from the scene/point corresponding to the selected bookmark.

Notes

•Opening the disc tray or turning the power off clears all stored bookmarks.

•The bookmark function may not work with some discs.