MAINTENANCE
1. Never store unused material in spreader. Return
unused product to its original container. |
|
2. Wash spreader thoroughly after each use and | Oil |
dry completely in sun or heated area. |
3.Oil the axle bearings, impeller shaft bearing in hopper, control knob in
4.Remove gear cover and wash gears thoroughly. Oil all bearing areas and face of gear teeth.
5. Gear mesh should be checked on a regular basis |
during high use periods. Clearance between the |
axle gear and pinion gear should be minimal but |
not tight. If adjustment is necessary, loosen axle |
collar set screw and hold gears together. Slide |
axle collar against the gear support and tighten |
axle collar set screw. Spin drive wheel. Gears |
should run freely and smoothly. |
6. Impeller surface should be cleaned periodically to |
remove |
spread pattern to change. |
Oil Impeller Shaft
Bearing In Hopper
Oil
Axle Collar
7. Tire pressure should be |
Oil
Oil
WARRANTY
Shindaiwa Inc. manufactures its products to superior standards of quality to ensure customers obtain the highest level of satisfaction. In keeping with this goal, Shindaiwa Inc. warrants the unit to the original purchaser as follows:
WARRANTY PERIOD
One year from the delivery date to the original purchaser for consumer and commercial applications.90 days for rental applications.
WARRANTY ADMINISTRATION
Within the covered warranty period, Shindaiwa Inc. will, at their option, repair or replace any defect in material or workmanship, without charge for parts or labor, if this product is presented at an authorized Shindaiwa dealer.
WARRANTY EXCLUSIONS AND LIMITATIONS
Shindaiwa Inc. assumes no responsibility for damages, loss, or injury resulting from:
Normal wear and tear
Misuse or neglect
Modifications to or removal of original component parts
The warranty is limited to the terms stated herein. Shindaiwa Inc. disclaims all liability for incidental or consequential damages. Some states do not allow the exclusion of incidental or consequential damages, so these limitations may not apply to you.
This warranty give you specific legal rights, and you may also have other rights which may vary from state to state.
Shindaiwa reserves the right to change the design or specifications of this product without obligation to modify previously manufac- tured products.
OWNER’S RESPONSIBILITIES
The owner of the unit must demonstrate reasonable care in the use, maintenance, and storage of this Shindaiwa product. If a warrant- able failure should occur, the owner must deliver the product to an authorized Shindaiwa servicing dealer for correction. All residual chem- icals must be flushed from the tank prior to delivery.
Unidentified chemicals left in the tank can pose a serious health threat to anyone servicing the unit and unaware of its presence!
To obtain warranty service, proof of purchase must be presented to the authorized Shindaiwa servicing dealer when the product is presented for repairs.
Proof of purchase must include date of purchase and the name and address of the selling dealer.
