Starting the Engine

IMPORTANT!

Engine ignition is controlled by a two position switch mounted on the throttle housing labeled, “I” for ON or START and “O” for OFF or STOP.

WARNING!

Never start the engine from the operating position.

1.Slide the ignition switch to the “ON” position.

2.Set the throttle lever to the “fast idle”:

a.Squeeze the throttle lever toward the handgrip on the shaft tube.

b.Depress and hold the throttle lock button.

c.While depressing the throttle lock button, release the throttle lever.

3.Press the primer bulb until fuel can be seen flowing in the transparent return tube.

IMPORTANT!

The primer system only pushes fuel through the carburetor. Repeatedly press- ing the primer bulb will not flood the engine with fuel.

4.Set the choke lever to the CLOSED position if engine is cold.

5.While holding the outer tube firmly with left hand. Use your other hand to slowly pull the recoil starter handle until resistance is felt, then pull quickly to start the engine.

CAUTION!

Do not pull the recoil starter to the end of the rope travel. Pulling the recoil starter to the end of the rope travel can damage the starter.

WARNING!

The cutting attachment may move when the engine is started!

When the Engine Starts...

ON

Throttle Lock

Button

Slide ignition to ON

Close choke

Set the choke lever to the CLOSED position

6.When the engine starts, slowly move the choke lever to the “OPEN” posi- tion. (If the engine stops after the initial start, close the choke and restart.)

7.Operating the throttle will automatically disengage the fast idle setting.

IMPORTANT!

If the engine fails to start after several attempts with the choke in the closed position, the engine may be flooded with fuel. If flooding is suspected, refer to the ”Starting a Flooded Engine” section of this manual.

Primer Bulb

Return Tube

Press primer

bulb...

Hold

the unit ¿UPO\

...and pull recoil

Make sure the

attachment is clear

starter handle

of obstructions!

upward

 

Open

After engine starts, move choke to OPEN position

ŶAfter the engine starts, allow the engine to warm up at idle 2 or 3 min- utes before operating the unit.

ŶAfter the engine is warm, pick up the unit and clip on the shoulder strap, if so equipped.

ŶAdvancing the throttle makes the cutting attachment move faster; releasing the throttle permits the attachment to stop moving. If the cutting attachment con-

tinues to move when the engine returns to idle, carburetor idle speed should be adjusted (see “Adjusting Engine Idle”.).

9

Page 8 Page 10
Page 9
Image 9
Shindaiwa AH2510/EVC, 89310 manual Starting the Engine, When the Engine Starts, Depress and hold the throttle lock button
Page 8 Page 10

89310, AH2510, AH2510/EVC specifications

The Shindaiwa AH2510/EVC, AH2510, and 89310 models represent a perfect blend of efficiency, versatility, and durability in the world of handheld outdoor power equipment. These tools are designed for both professional landscapers and avid gardeners, offering cutting-edge features and innovative technologies that make yard maintenance tasks easier and more effective.

One of the standout features of the Shindaiwa AH2510 is its powerful engine. Equipped with a robust two-stroke engine, the AH2510 delivers impressive performance while ensuring high fuel efficiency. This not only allows users to complete their tasks swiftly but also minimizes operational costs. The engine's design reduces emissions, meeting stringent environmental regulations and ensuring a cleaner working environment.

Another highlight of the Shindaiwa AH2510/EVC is its ergonomic design. The equipment comes with a padded handle for comfortable grip and ease of use, reducing operator fatigue during extended use. The lightweight construction of the tools further contributes to their maneuverability, making them ideal for both large areas and intricate landscaping work. Users will appreciate the balance and control afforded by the design, which enables them to navigate varied terrains effortlessly.

Technology is at the forefront of the Shindaiwa AH2510 series. Features like the Easy Start System significantly reduce the effort required to start the machine, allowing users to get to work with minimal downtime. Additionally, the advanced vibration-damping technology enhances user comfort, allowing for longer periods of use without the strain associated with traditional equipment.

Durability is a hallmark of Shindaiwa products. The AH2510 models are constructed with high-quality materials that withstand the rigors of everyday use, ensuring a long lifespan. Furthermore, the commercial-grade components mean that these tools can handle demanding tasks without compromising performance.

Versatility is another key characteristic of the AH2510 series. This range of tools can be easily adapted for various applications, making them suitable for trimming, pruning, and more. Users can switch attachments seamlessly, transforming their equipment to meet the challenges of different jobs.

In summary, the Shindaiwa AH2510/EVC, AH2510, and 89310 models offer a compelling combination of power, comfort, and adaptability. With their robust engineering, user-friendly features, and environmental consciousness, these tools stand out in the competitive market of outdoor power equipment, catering to the needs of professionals and homeowners alike.
Top Page Image Contents