Shindaiwa 81719, LE2510 manual Safety Instructions, Properly Equipped Operator

Safety Instructions

Work Safely

Shindaiwa Edgers operate at very high speeds and can do serious damage or injury if they are misused or abused. Never allow a person without training or instruction to operate this unit!

WARNING!

Never make unauthorized attach- ment installations. Do not use attachments not approved by Shindaiwa for use on this unit.

Stay Alert

You must be physically and mentally fit to operate this unit safely.

WARNING!

Never operate	�
power equipment of any
kind if you are tired or if you

are under the influence of alcohol, drugs, medication or any other substance that could affect your ability or judgement.

WARNING!

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

WARNING!

Minimize the Risk of Fire

NEVER smoke or light fires near the engine.

ALWAYS stop the engine and allow it to cool before refueling. Avoid overfilling and wipe off any fuel that may have spilled.

ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank. If fuel leaks are evident, stop using the unit immediately. Fuel leaks must be repaired before using the unit.

ALWAYS move the unit to a place well away from a fuel storage area or other readily flammable materials before starting the engine.

NEVER place flammable material close to the engine muffler.

NEVER operate the engine without the spark arrester screen in place.

	WARNING!
	Use Good Judgment
ALWAYS wear eye protection to shield	ALWAYS use the proper cutting	ALWAYS hold the unit firmly with both
against thrown objects.	attachment.	hands when edging, and maintain control
NEVER run the engine when transporting	ALWAYS stop the engine immediately	at all times.
the unit.	if it suddenly begins to vibrate or shake.	ALWAYS keep the handles clean.
NEVER run the engine indoors! Make sure	Inspect for broken, missing or improperly	ALWAYS disconnect the spark plug wire
there is always good ventilation. Fumes	installed parts or attachments.	before performing any maintenance work.
	NEVER use a non-Shindaiwa approved
from engine exhaust can cause serious
injury or death.	cutting attachment.
ALWAYS clear your work area of trash or	ALWAYS keep the unit as clean as
hidden debris that could be thrown back at	practical. Keep it free of loose vegetation,
you or toward a bystander.	mud, etc.

The Properly Equipped Operator

Wear close-fitting clothing to protect legs and arms. Gloves offer added protection and are strongly recom- mended. Do not wear clothing or jewelry that could get caught in machinery or underbrush. Secure hair so it is above shoulder level. NEVER wear shorts!

Keep a proper footing and do not overreach—main- tain your balance at all times during operation.

Wear appropriate footwear (non-skid boots or shoes): do not wear open-toed shoes or sandals. Never operate the unit while barefoot!

Wear hearing protection devices and a

broad-brimmed hat or helmet.

Always wear eye protection such as goggles or safety glasses.

Always operate with both hands firmly gripping the unit.

Always make sure the appropriate cutting attachment shield is correctly installed and in good condition.

Keep away from the rotating blade at all times, and never lift a moving attachment above waist-high.

Figure 1