Shindaiwa X7502800900, T242 manual Poor acceleration, Engine stops abruptly

Models: X7502800900 T242

1 24
Download 24 pages 18.64 Kb
Page 20
Image 20

Troubleshooting Guide (continued)

ADDITIONAL PROBLEMS

Symptom

Poor acceleration.

Possible Cause

Clogged air filter.

Clogged fuel filter.

Lean fuel/air mixture.

Idle speed set too low.

Remedy

Clean the air filter.

Replace the fuel filter.

Consult with an authorized Shindaiwa servicing dealer.

Adjust idle. Check Specifications page for correct idle speed.

Engine stops abruptly.

Ignition switch turned off.

Fuel tank empty.

Water in the fuel.

Clogged fuel filter.

Shorted spark plug or loose terminal.

Ignition failure.

Piston seizure.

Reset the switch and re-start.

Refill with fresh, clean unleaded gasoline with a pump octane of 89 or higher mixed with an air cooled engine oil that meets or exceeds ISO-L-EGD and/or JASO FD classified oils at 50:1 gasoline/oil ratio.

Replace fuel filter.

Clean or replace spark plug. Check the Specifications section for the correct plug and gap for your unit. Tighten

the terminal.

Replace the ignition unit.

Consult with an authorized Shindaiwa servicing dealer.

Engine difficult to shut off.

Ground (stop) wire is disconnected, or switch is defective.

Overheating due to incorrect spark plug.

Overheated engine.

Test and replace as required.

Replace the spark plug. Check the Specifications section for the correct plug and gap for your unit. Restart.

Idle engine until cool.

 

 

 

 

 

Idle set too high.

 

Adjust idle. Check Specifications page for correct

Engine will not idle

 

 

 

 

 

 

 

 

idle speed.

 

 

down.

 

 

 

Engine has an air leak.

 

Consult with an authorized Shindaiwa servicing

 

 

 

 

 

 

 

 

 

 

 

dealer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Engine idle too high.

 

Adjust idle. Check Specifications page for correct idle

 

 

 

 

 

 

Cutting attachment

 

 

 

 

 

 

speed.

 

 

 

 

Broken clutch spring or worn clutch

 

Replace spring/shoes as required, check idle speed.

moves at engine idle.

 

 

 

 

 

 

 

 

 

 

spring boss.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Excessive vibration.

Loose attachment holder.

Warped or damaged attachment.

Loose gearcase.

Bent main shaft/worn or damaged bushings.

Inspect and re-tighten holders securely.

Inspect and replace attachment as required.

Tighten gearcase securely. Inspect and replace as necessary.

Cutting attachment will not move.

Shaft not installed in powerhead or gearcase. Broken shaft.

Damaged gearcase.

Inspect and reinstall as required.

Consult with an authorized Shindaiwa servicing dealer.

20

Page 20
Image 20
Shindaiwa X7502800900, T242 manual Poor acceleration, Engine stops abruptly

X7502800900, T242 specifications

The Shindaiwa T242 is a powerful and reliable trimmer designed for both professional landscapers and homeowners seeking an efficient tool for their yard maintenance needs. With its robust engine and advanced features, the T242 stands out in the competitive outdoor power equipment market.

One of the main features of the Shindaiwa T242 is its 21.2 cc, two-stroke engine, which delivers impressive power and efficiency. The engine is designed to reduce emissions, adhering to environmental regulations while still providing sufficient torque for cutting through thick grass and dense vegetation. The lightweight design of the trimmer allows for extended use without causing excessive fatigue, making it ideal for both small and large landscaping tasks.

Another notable characteristic of the T242 is its Easy Start system, which simplifies the starting process. This technology reduces the amount of effort needed to start the engine, enabling users to get to work quickly without the frustration that often comes with pull-start engines. The trimmer also features a high-capacity fuel tank that allows for longer operation times between refueling, further enhancing productivity.

The Shindaiwa T242 is equipped with a commercially rated, dual-line bump feed head, providing users with the ability to easily advance the line by tapping it against the ground. This feature is particularly useful for users who need to maintain their trimmer without having to stop and manually feed the line. The cutting width of 17 inches makes it versatile enough for both trimming around tight areas and clearing larger sections of grass.

Durability is another strong suit of the T242, as it is constructed with high-quality materials that are built to withstand tough conditions. The trimmer’s design includes vibration-dampening technology, which minimizes user fatigue and allows for greater control while operating the machine.

In addition, the T242 features an ergonomic handle design that provides optimal comfort and grip, ensuring that users can operate the trimmer for extended periods without discomfort. The adjustable handle allows users to customize their grip position based on their height and preference, further enhancing the overall user experience.

In conclusion, the Shindaiwa T242 trimmer combines power, efficiency, and user-friendly features in a lightweight and durable package. It is an excellent choice for anyone looking to tackle landscaping tasks with ease and confidence, making it a valuable addition to any outdoor equipment arsenal.