Cutting Grass—Units equipped with a trimmer head

Your Shindaiwa unit may be equipped with one of several Shindaiwa trimmer head models, each with features for specific applications and/or operational requirements.

NOTE:

For proper operation, always refer to the instructions accompanying the trimmer head being used. Available trimmer head styles include:

nSemi-automatic. Trimmer line is indexed when the operator taps the trimmer head on the ground during operation.

nManual. The operator indexes line manually with the grass trimmer stopped.

nFixed. The operator must stop the unit and add new lengths of trimmer line manually.

nFlail. This device, designed for clearing weeds and light brush, features three nylon blades attached to the head by pivots.

NOTE:

Additional hardware may be required to mount the Fixed Line or the Flail type trimmer heads.

CAUTION!

Do not push the rotating line into trees, wire fences or any material that could tangle or break line ends.

Engine Operating Speeds

Operate the unit at full throttle while cutting grass.

CAUTION!

Operation of trimmer without a cutting attachment shield and using excessive line length can lead to premature clutch failure.

CAUTION!

Operation at low RPM can lead to premature clutch failure.

Hold the trimmer so the trimmer head is angled slightly into the area to be cut. To ensure maximum trimmer-line service life, cut only with the tip of the trimmer line. Cut grass by swinging the trimmer from left to right. Keep the trimmer head

horizontal. See Figure 22.

Trimming and

Mowing Grass

Figure 22

Edging

Figure 23

Tilt the handle about 100° to the left (from horizontal) and move forward, holding the trimmer vertically as shown in Figure 23.

Maintenance

General maintenance

IMPORTANT!

MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL DEVICES AND SYSTEMS MAY BE PERFORMED BY ANY REPAIR ESTABLISHMENT OR INDIVIDUAL; HOWEVER, WARRANTY REPAIRS MUST BE PERFORMED BY A DEALER OR SERVICE CENTER AUTHORIZED BY ECHO,INC. THE USE OF PARTS THAT ARE NOT EQUIVALENT IN PERFORMANCE AND DURABILITY TO AUTHORIZED PARTS MAY IMPAIR THE EFFECTIVENESS OF THE EMISSION CONTROL SYSTEM AND MAY HAVE A BEARING ON THE OUTCOME OF A WARRANTY CLAIM.

NOTE:

Using non-standard replacement parts could invalidate your Shindaiwa warranty.

WARNING!

Before performing any main- tenance, repair, or cleaning work on the unit, make sure the engine and cutting attachment are completely stopped. Disconnect the spark plug wire before performing service or maintenance.

WARNING!

Non-standard accessories, cut- ting attachment, or replacement parts may not operate properly with your unit and may cause damage and lead to personal injury.

13

Page 12 Page 14
Page 13
Image 13
Shindaiwa T242 Cutting Grass-Units equipped with a trimmer head, Maintenance, Engine Operating Speeds, General maintenance
Page 12 Page 14

X7502800900, T242 specifications

The Shindaiwa T242 is a powerful and reliable trimmer designed for both professional landscapers and homeowners seeking an efficient tool for their yard maintenance needs. With its robust engine and advanced features, the T242 stands out in the competitive outdoor power equipment market.

One of the main features of the Shindaiwa T242 is its 21.2 cc, two-stroke engine, which delivers impressive power and efficiency. The engine is designed to reduce emissions, adhering to environmental regulations while still providing sufficient torque for cutting through thick grass and dense vegetation. The lightweight design of the trimmer allows for extended use without causing excessive fatigue, making it ideal for both small and large landscaping tasks.

Another notable characteristic of the T242 is its Easy Start system, which simplifies the starting process. This technology reduces the amount of effort needed to start the engine, enabling users to get to work quickly without the frustration that often comes with pull-start engines. The trimmer also features a high-capacity fuel tank that allows for longer operation times between refueling, further enhancing productivity.

The Shindaiwa T242 is equipped with a commercially rated, dual-line bump feed head, providing users with the ability to easily advance the line by tapping it against the ground. This feature is particularly useful for users who need to maintain their trimmer without having to stop and manually feed the line. The cutting width of 17 inches makes it versatile enough for both trimming around tight areas and clearing larger sections of grass.

Durability is another strong suit of the T242, as it is constructed with high-quality materials that are built to withstand tough conditions. The trimmer’s design includes vibration-dampening technology, which minimizes user fatigue and allows for greater control while operating the machine.

In addition, the T242 features an ergonomic handle design that provides optimal comfort and grip, ensuring that users can operate the trimmer for extended periods without discomfort. The adjustable handle allows users to customize their grip position based on their height and preference, further enhancing the overall user experience.

In conclusion, the Shindaiwa T242 trimmer combines power, efficiency, and user-friendly features in a lightweight and durable package. It is an excellent choice for anyone looking to tackle landscaping tasks with ease and confidence, making it a valuable addition to any outdoor equipment arsenal.
Top Page Image Contents