Hobart FP150 manual Maintenance, Replacement Dicing Grids, Service

9.Replace the locking screw.

10.Place the feed hopper on the hinge pins and lower to normal position. Turn and lower the pusher plate. Replace the feed tube pusher.

MAINTENANCE

WARNING: TURN THE MACHINE OFF AND UNPLUG THE ELECTRICAL CORD BEFORE DOING ANY MAINTENANCE.

Routinely inspect the machine to ensure that it is in proper working order. Plates must be clean, intact and sharp.

Regularly lubricate the pusher plate shaft with a drop of mineral oil, NOT COOKING OIL.

If the machine develops any problems, contact your local Hobart service office.

REPLACEMENT DICING GRIDS

Depending on usage, dicing grids become dull from wear with an average life expectancy from 8-18 months. Dicing grids cannot be resharpened and are therefore expendable. Replacement dicing grids are available from your local Hobart Service Office.

SERVICE

Contact your local Hobart Service Office for any repairs or adjustments needed on this equipment. Long-term service contracts are available on this and other Hobart products.

– 7 –