Vermont Castings Jefferson Vent Free Gas Heater
Maintenance
The following procedures will help ensure that your stove continues to perform safely and efficiently.
Firebox Cleaning and Inspection
Cleanliness is critical to correct operation of the heater. The log set, burner, valve controls and air circulation areas must all be kept free of dust and unobstructed by debris. Inspect these areas before each use and clean whenever accumulation is evident. Follow the simple procedure outlined below.
Frequent cleaning may be necessary in living environments subject to excessive carpet lint or pet hair. For example, if you live with a dog that sheds continuously, you will need to inspect the burner area frequently and clean it as often as the accumulation requires. In extreme conditions, it may be necessary to clean the burner and log set monthly or
This appliance should be inspected and thor- oughly cleaned annually by a qualified gas techni- cian.
Cleaning Procedure
1.Turn the burner OFF and let the heater cool com- pletely before cleaning.
2.Remove the safety screen. (Fig. 30)
3.Carefully inspect the log set for damage. Contact your local dealer if any damage is evident. DO NOT
OPERATE THE HEATER WITH A DAMAGED LOG SET.
4.Use a
5.Replace the screen and Front Plate. DO NOT
OPERATE THE HEATER WITH THE SAFETY SCREEN REMOVED.
Screen Hooks
ST208b
Fig. 30 Remove screen.
Care of Cast Iron
An occasional dusting with a dry rag will help keep the painted surfaces looking new.
Porcelain enamel surfaces shoul be cleaned with a soft damp cloth. Do not use abrasive cleaning agents. If necessary, use only a cleaning agent formulated specifically for use on porcelain enamel surfaces.
WARNING
Turn the burner Pilot OFF before applying paint. NEVER paint pilot or around pilot area.
WARNING
Dust and debris accumulation can result in poor performance. Inspect the valve compartment, burner parts and log set frequently and clean these parts monthly or as often as accumulation warrants.
20003447 | 17 |
