2.Whenever possible, avoid operating the machine near ditches, embankments and steep inclines.
3.Reduce speed when turning, operating on slopes, slick or wet surfaces. Allow extra distance to stop.
4.Stay off of slopes too steep for safe operation. To check a slope, attempt to back up it (with the cutter deck down). If the machine cannot back up the slope without the wheels slipping, do not operate the machine on this slope.
5.Always travel up or down the slope whenever possible. Never across the slope.
6.Operate the machine smoothly, no sudden turns, starts or stops on a slope.
7.Never tow on slopes. The weight of the towed equipment may cause loss of traction and loss of control.
8.DO NOT permit untrained personnel to operate the machine.
2.6 MAINTENANCE CONSIDERATIONS
1.Never make adjustments to the machine with the engine running unless specifically instructed to do so. If the engine is running, keep hands, feet, and clothing away from moving parts.
2.Remove the key from the ignition switch to prevent accidental starting of the engine when servicing or adjusting the machine.
3.Keep all nuts, bolts and screws tight, to ensure the machine is in safe working condition. Check blade mounting bolts frequently to be sure they are tight.
4.Do not change the engine governor settings or overspeed the engine. See the engine operator's manual for information on engine settings.
5.To reduce fire hazard, keep the engine free of grass, leaves, excessive grease, oil and dirt.
CAUTION:
Hydraulic fluid is under high pressure. Keep body and hands away from pinholes or nozzles that eject hydraulic fluid under high pressure. Hydraulic fluid under high pressure may have sufficient force to penetrate skin and cause serious injury. If hydraulic fluid is injected into the skin, it must be surgically removed within a few hours by a doctor or gangrene may result. If you need service on your hydraulic system, please see your authorized Scag dealer.
7
