Assembly (continued)

Install Blade

Tools Required: 4 mm hex key wrench (locking tool), 17 mm wrench, Pliers

Parts Required: Upper plate w/25 mm diameter pilot, lower blade mounting plate, 10 mm hex nut w/L.H. thread, 2 mm x 25 mm cotter pin,

blade w/25 mm arbor diameter.

1.Install adapter plate (D) on splined PTO shaft, pilot side down. Blade installa- tion requires Upper Plate (D) with 25 mm pilot.

2.Install Blade (K) on adapter plate pilot. Blades must be installed so that rota- tion arrow on blade matches rotation of unit: teeth toward direction of rotation (See debris shield decal). Secure blade with Lower Plate (H), and 10 mm L.H. nut (G). Turn nut counter-clockwise on PTO shaft to tighten.

3.Align hole in adapter plate with notch in gear housing, and insert Locking Tool

(A) to prevent splined shaft from turning. Arrow on gear housing points to notch. Tighten 10 mm nut securely.

4.Insert Cotter Pin (L) in hole in PTO shaft, and bend pin legs around shaft counterclockwise to retain 10 mm nut.

IMPORTANT

Never reuse a cotter pin - install a new cotter pin each time a blade is installed or replaced.

5.Remove locking tool.

The unit should now be completely assembled and ready for use

with a blade.

IMPORTANT!

Discard blades that are bent, warped, cracked, broken or damaged in any way. Use a sharp blade. A dull blade is more likely to snag and thrust.

D

A

K

H

G

L

DA

K

H

GL

Mixing Fuel

WARNING!

Alternative fuels, such as E15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa requirements are NOT approved for use in Shindaiwa gasoline engines. Use of alternative fuels may cause

performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) is NOT approved.

Hybrid 4TM Mixture Oil - Engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD standards must be used. Shindaiwa highly recommends using Shindaiwa Red ArmorTM engine oil in all Shindaiwa Hybrid 4TM engines to protect the engine from harmful carbon build up, maintain engine performance, and increase engine life. Shindaiwa Red ArmorTM engine oil exceeds ISO-L-EGD and J.A.S.O. M345/FD performance requirements. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD certified oil will void the engine warranty.

10

Page 10
Image 10
Shindaiwa X7502831600 manual Assembly Install Blade, Mixing Fuel

X7502831600 specifications

The Shindaiwa X7502831600 is a robust and innovative brush cutter renowned for its superior performance and advanced features that cater to both professional landscapers and gardening enthusiasts. This machine stands out in the competitive market of outdoor power equipment, integrating cutting-edge technology to deliver exceptional results in a variety of conditions.

One of the main features of the Shindaiwa X7502831600 is its powerful engine. Equipped with a high-performance, low-emission engine, this brush cutter ensures that you can tackle even the toughest vegetation without compromising on environmental standards. The engine is designed for durability and efficiency, allowing it to maintain optimal power while reducing fuel consumption.

Another significant characteristic is the ergonomic design of the X7502831600. Built with user comfort in mind, it features a lightweight construction that minimizes fatigue during prolonged use. The comfortable grips and well-balanced design enhance maneuverability, making it easier to navigate around trees, bushes, and other obstacles in your yard or garden.

The brush cutter incorporates advanced vibration-dampening technology, which significantly reduces operator fatigue and enhances overall control. This feature is particularly valuable for users who need to work for extended periods, as it helps ensure a more pleasant and productive experience.

The dual-string head of the Shindaiwa X7502831600 is designed to deliver efficient cutting performance, allowing for a wider cutting swath and reducing the number of passes needed to clear an area. This not only saves time but also enhances productivity, making it an excellent choice for commercial landscaping or large residential projects.

Additionally, the X7502831600 features easy-to-use controls and a quick-start mechanism, ensuring that users can start their work with minimal hassle. The inclusion of maintenance-friendly components simplifies routine upkeep, which is essential for prolonging the life of the equipment.

The Shindaiwa X7502831600 showcases a combination of reliability, power, and comfort, making it a top choice for those looking to maintain their landscapes with efficiency and ease. Whether you’re tackling thick brush or maintaining garden edges, this model is equipped to meet the demands of any outdoor project. With its innovative technology and user-friendly design, the X7502831600 truly sets a new standard in the world of brush cutters.