Starting the Engine

Before starting the engine

This unit comes completely assem- bled. Before using this product, please make sure you have all the components required for a complete unit. Carefully inspect all components for damage.

■■This user manual

■■Tol kit including combination spark plug/13mm wrench

■■Blade cover

IMPORTANT!

The terms “left,” “left-hand,” and “LH”; “right,” “right-hand,” and “RH”; “front” and “rear” refer to directions as viewed by the operator during normal opera- tion of this product.

Starting the Engine

IMPORTANT!

Engine ignition is controlled by a two position switch mounted on the throttle housing labeled, “I” for ON or START and “O” for OFF or STOP.

WARNING!

The cutting attachment will operate immediately when the engine starts and could result in loss of control and possible seri- ous injury. Keep movable parts of the cutting attachment away from objects that could become entan-

WARNING!

Never start the engine from the operating position. The cutting attachment will move when the engine accelerates!

NOTE:

The blade cover is used for transportation and storage. Remove blade cover before using the unit.

gled or thrown.

1.Slide the ignition switch to the “ON” position.

2.Set the throttle trigger to the “fast idle”:

a.Depress and hold the throttle lock, then squeeze the throttle trigger.

b.Depress and hold the fast idle button.

c.Release the throttle trigger and throttle lock, then release fast idle button.

3.Press the primer bulb until fuel can be seen flowing in the transparent return tube.

IMPORTANT!

The primer system only pushes fuel through the carburetor. Repeatedly

pressing the primer bulb will not flood

the engine with fuel.

START

Ignition

Throttle

Fast Idle interlock button

Throttle trigger

Slide the ignition switch to the ON position

Choke closed

Primer bulb

Return Tube

Press the primer bulb

 

 

Hold the unit

Make sure the cutters are

 

clear of obstructions!

 

 

Pull recoil starter handle upward

4.

Set the choke lever to the CLOSED

 

position if engine is cold.

5.

Place the unit on the ground. Grip

 

the engine cover with your left hand

 

and the starter handle with your

 

right hand (shown).

Set the choke lever to the CLOSED position if

Start the trimmer by pulling the starting

engine is cold

handle rapidly outward

 

6.

Pull the starter handle slowly

 

toward you until you feel the starter

 

mechanism engage.

7.

Start the trimmer by pulling the

 

starting handle rapidly outward.

CAUTION!

The recoil starter can be easily damaged by abuse! Never pull the starter cord to its full length.

IMPORTANT!

If the engine fails to start after sev- eral attempts with the choke in the closed position, the engine may be flooded with fuel. Refer to the “Start- ing a Flooded Engine” section of this manual.

9

Page 8 Page 10
Page 9
Image 9
Shindaiwa X7502862900 manual Starting the Engine, Before starting the engine
Page 8 Page 10

X7502862900 specifications

The Shindaiwa X7502862900 is a powerful and innovative professional-grade backpack blower, designed to meet the demanding needs of landscaping and maintenance professionals. With its robust engineering and advanced features, this model stands out in the competitive arena of outdoor power equipment.

One of the most notable features of the X7502862900 is its impressive engine performance. It is fitted with a high-performance 75.6 cc 2-stroke engine that delivers outstanding power while maintaining fuel efficiency. This engine technology ensures that users can tackle the most challenging tasks without the need for frequent refueling, enhancing productivity on the job.

Another key attraction of the X7502862900 is its lightweight design, which allows for extended usage without causing unnecessary fatigue. Weighing in at approximately 26.4 pounds, it strikes an excellent balance between power and portability. The ergonomic harness with padded straps provides added comfort, allowing users to maneuver through various terrains and tight spaces with ease.

The blower’s air volume and velocity are impressive, achieving air speeds of up to 230 mph and airflow ratings of 756 CFM, making it exceptionally effective for moving large piles of leaves, grass clippings, and debris. This combination of speed and volume ensures that users can maintain clean and tidy outdoor spaces efficiently.

Shindaiwa has also incorporated advanced technologies into the X7502862900 to enhance its performance and reliability. The Back Pressure Technology optimizes exhaust flow, improving fuel combustion and overall efficiency. Additionally, the blower features a unique anti-vibration system that reduces operator fatigue, providing a smoother and more comfortable user experience.

Maintenance is made easy with the X7502862900, as it is equipped with a convenient air filter system that enhances engine life and performance. The easy-access design of the filter compartment allows users to perform routine maintenance without hassle.

In conclusion, the Shindaiwa X7502862900 is a high-performance backpack blower that combines power, efficiency, and user comfort. With its advanced engine, impressive output, and thoughtful design features, it caters to the demanding requirements of professionals in the landscaping and maintenance industry, making it an essential tool for any outdoor task. Whether it's for residential or commercial use, the X7502862900 delivers exceptional results, making yard work faster and more efficient.
Top Page Image Contents