Maintenance (continued)

Cutter blade adjustment

WARNING!

The cutter blades are very sharp! Always wear gloves when working around the cutter assembly.

Cutting performance of your machine depends a great deal on proper cutter blade adjustment. Properly adjusted blades will oscillate freely yet help pre- vent binding of cut material between blades. Adjust blades as follows:

1.Loosen all blade locknuts at least one full turn.

2.Tighten each blade shoulder bolt firmly, and then loosen the shoulder bolts 1/4 to 1/2 turn.

CAUTION!

Operating the trimmer with worn or improperly adjusted cutters will reduce cutter performance and may also damage your machine. Never operate the machine with damaged or worn cutters.

3.Working from the gearcase end, lock each bolt in place by firmly tightening its locknut while prevent- ing the shoulder bolt from turning.

When shoulder bolt adjustment is cor- rect, there should be a gap of 0.25–

0.50mm between the cutter blades and the flat washers, and the flat washer beneath each bolt head should turn freely.

 

 

Locknut

Guide Bar

 

 

Cutter

 

Washer

Shoulder Bolt

(should turn

Blades

freely)

 

 

Adjusting cutter blades

 

135 - hour maintenance

WARNING!

Never operate the unit with

a damage or missing muffler or spark

arrester! Operating with a missing

or damaged spark arrester is a fire

hazard and could also damage your hearing.

If the engine becomes sluggish and low on power, check and clean the spark arrester screen.

1.

Loosen the knob of the spark plug

 

cover and remove the cover.

2.

Remove the spark plug lead from

 

the spark plug.

3.

Loosen the four 5 mm bolts located

 

at the top of the recoil starter hous-

 

ing and remove the cover.

4.

Loosen the 5 mm bolt located at the

 

top of the cylinder cover and two

 

4 mm bolts located at the bottom

 

of the cylinder cover and remove

 

cover.

 

Muffler plate screws

Top tail plate

 

Spark arrester screen

 

 

 

Muffler cover

 

Lower tail plate

screws

 

Plate

 

 

 

Muffler

 

 

cover bolts

Gaskets

 

 

 

Muffler

 

Gasket plate

gasket

Muffler

 

 

Muffler gasket bolt

Muffler

 

 

 

 

cover

5.

Loosen three 5 mm muffler cover

 

bolts and remove the muffler cover.

6.

Remove muffler gasket bolt.

7.

Loosen two 4 mm screws from the

 

muffler cover.

8.

Remove two 4 mm screws from the

 

top tail plate and remove tail plate.

9.Remove the spark arrester screen and clean with a stiff bristle brush.

10.Remove the muffler from the engine and inspect the cylinder exhaust port for carbon buildup.

11.Reassemble the muffler in the reverse order of disassembly

IMPORTANT!

If you note excessive carbon buildup, consult your servicing dealer.

14

Page 13 Page 15
Page 14
Image 14
Shindaiwa X7502862900 manual Cutter blade adjustment
Page 13 Page 15

X7502862900 specifications

The Shindaiwa X7502862900 is a powerful and innovative professional-grade backpack blower, designed to meet the demanding needs of landscaping and maintenance professionals. With its robust engineering and advanced features, this model stands out in the competitive arena of outdoor power equipment.

One of the most notable features of the X7502862900 is its impressive engine performance. It is fitted with a high-performance 75.6 cc 2-stroke engine that delivers outstanding power while maintaining fuel efficiency. This engine technology ensures that users can tackle the most challenging tasks without the need for frequent refueling, enhancing productivity on the job.

Another key attraction of the X7502862900 is its lightweight design, which allows for extended usage without causing unnecessary fatigue. Weighing in at approximately 26.4 pounds, it strikes an excellent balance between power and portability. The ergonomic harness with padded straps provides added comfort, allowing users to maneuver through various terrains and tight spaces with ease.

The blower’s air volume and velocity are impressive, achieving air speeds of up to 230 mph and airflow ratings of 756 CFM, making it exceptionally effective for moving large piles of leaves, grass clippings, and debris. This combination of speed and volume ensures that users can maintain clean and tidy outdoor spaces efficiently.

Shindaiwa has also incorporated advanced technologies into the X7502862900 to enhance its performance and reliability. The Back Pressure Technology optimizes exhaust flow, improving fuel combustion and overall efficiency. Additionally, the blower features a unique anti-vibration system that reduces operator fatigue, providing a smoother and more comfortable user experience.

Maintenance is made easy with the X7502862900, as it is equipped with a convenient air filter system that enhances engine life and performance. The easy-access design of the filter compartment allows users to perform routine maintenance without hassle.

In conclusion, the Shindaiwa X7502862900 is a high-performance backpack blower that combines power, efficiency, and user comfort. With its advanced engine, impressive output, and thoughtful design features, it caters to the demanding requirements of professionals in the landscaping and maintenance industry, making it an essential tool for any outdoor task. Whether it's for residential or commercial use, the X7502862900 delivers exceptional results, making yard work faster and more efficient.
Top Page Image Contents