6. Press OK button to confirm
To delete call barring number
1.Press MENU button then UP/DOWN button until the display shows BASE SET
2.Press the OK button, the display shows PIN?
3.Key in your PIN number
4.Press the OK button, then UP/DOWN button to the location BARRING
5.Press the OK button, the display shows the call barring number you set.
6.Press the CLEAR button to delete the number
7.Press OK button to confirm
Base Melody
You can adjust the Base Melody following the below instruction.
1.Press MENU button then UP/DOWN button to the location BASE SET
2.Press OK button and Key in the PIN number
3.Press OK button then UP/DOWN button to the location B Melody
4.Press OK button and press UP/DOWN button to change the melody
5.Press the OK button to confirm the melody you chosen
Base Volume
You can adjust the base volume following the below instruction
1.Press MENU button then UP/DOWN button to the location BASESET
2.Press OK button and Key in the PIN number
3.Press OK button then UP/DOWN button to the location B VOLUME The display shows the current volume level
4.Press UP/DOWN button to change the volume
5.Press the OK button to confirm the volume level you chosen
Least cost route (LCR) function (Optional)
With the LCR function, the phone will automatically replace a long number (up to 11 digits) with a comparative short number (up to 3 digits), to simplify the process of dialing a long number.
Example:
If you program to replace "00" with "17909", whenever you dial a number beginning with the“00”,the phone will automatically change this to “17909”. If he dials "00 15151500", the phone will automatically replace the number to be dialed out as “17909 15151500”
Note:
LCR function only replaces the prefix of the phone number you dial.
To set LCR:
1.Press MENU button then UP/DOWN button to the location BASE SET
2.Press the OK button, the display shows PIN?
3.Key in your PIN number and press the OK button, then UP/DOWN button to the location
LCR
4.Press the OK button, the display shows SHORT?
5.Press the OK button, the display shows EMPTY, key in the short number you want to replace the long number directly
6.Press the OK button to confirm, then the display shows LONG?
7.Press the OK button, the display shows EMPTY, key in the long number
8.Press the OK button to confirm
To Set Dial Mode
You can change dial mode to TONE or PULSE dialing.
To set dial mode:
1.Press MENU button, then UP/DOWN button to the location BASE SET
2.Press the OK button, the display shows PIN?
3.Key in your PIN number and press the OK button, then press UP/DOWN button to the location DIAL MODE
9
