User Manual
INSTALLATION
1. Choose a suitable site for the base unit
Make sure it is not near to another telephone, nor to other electrical equipment.
2.Plug the mains power lead and the telephone line cord into the rear of the base unit.
3.Plug the mains adapter into a
230V AC, 50 Hz mains socket with the switch on the socket set to OFF.
Note: The illustration of adaptor may vary from country to country.
4.Switch on mains power at the socket
5.Fit the battery in the handset(s)
Insert the battery cell as shown
Fit the battery compartment cover, sliding it until it clicks firmly into Position.
6. Connect the base unit to the telephone line
Switch off power at the mains socket.
Insert the telephone line plug into the socket.
Switch mains power back on
Make sure the mains socket is switched on if you want to use the
Note: |
|
|
1. | The charger pod does not have a connection to |
|
| the telephone line. | Use the plug to raise the shutter |
2. | When Handset is placed onto the charge pod, a | |
| red light lights up to indicate it is charging. | before pushing it into the socket |
3. The illustration of telephone's socket may vary from country to country.
5
