Shopsmith DustCollector manual Safety Rules for Shopsmith Dust Collector

330002 Dust Collector

•Donotleavethetoolrunningunattended.Turn power off. Don’t leave tool until it comes to a complete stop.

•Avoid unintentional starting. Make sure the switchisinthe“off”positionbeforepluggingin or unplugging the tool.

Safety Rules for the

Shopsmith Dust Collector

•ReadandunderstandtheOwnersManual.Learn the Dust Collector’s applications and limita- tions as well as the specific potential hazards peculiar to it.

•GroundtheDustCollector.Thecollectorcomes equipped with an approved 3-conductor cord and a 3-prong grounding type plug to fit the proper grounding type receptacle, the green conductor in the cord is the grounding wire. Never connect the green wire to a live terminal.

•Avoiddangerousenvironments.Electricshock could occur if the Dust Collector is used on wet surfaces. Do not expose it to rain, snow or wet floors. Store it indoors.

•Do not operate the Dust Collector without the 3-way inlet or the 4' inlet and elbow securely mounted in place. The airflow can pull body parts into the intake opening and into contact with the fan.

•Do not pick up water or wet materials with the Dust Collector.

•Position the hose(s) out of the way so you won’t trip over them. . Do not pick up hot or burning materials such as cigarettes and ashes. They could ignite a fire in the bag. These materials should be properly disposed of in a fireproof container.

•Do not attach the Dust Collector or hoses to a tool used for metal grinding or sharpening. Sparks generated during grinding could ignite

dust and shavings inside the bag. They may also damage the hose and the fittings.

•Do not reach across a power tool to turn off the DustCollector.Turnoffthepowertoolandthen go around to the Dust Collector and turn it off.

•Do not force the Dust Collector to do a job for which it was not designed.

•Check damaged parts. A damaged part should beproperlyrepairedorreplacedbeforefurther use. If a strange noise or vibration develops, immediatelyturnoffthepower,unplugtheDust Collector and correct the problem.

•Avoid unintentional starting. Make sure the switchisinthe“Off”positionbeforepluggingin or unplugging the Dust Collector.

•TurnoffandunplugtheCollectorbeforechang- ingbags,andperformingmaintenanceandser- vice.

•Do not stand or lean on the Dust Collector. You could fall onto the Collector or it could tip over injuringyouand/ordamagingtheCollector.

•Maintain the Dust Collector. Keep the Dust Collector maintained according to the Owners Manual.

•Use only recommended Shopsmith parts and accessories on your Dust Collector. NEVER use non-Shopsmith replacement parts or ac- cessories.TheyarenotdesignedlikeShopsmith parts. Using non Shopsmith parts may cause a hazardous condition and will void your war- ranty.

•Do not leave the Dust Collector running unat- tended.

•Do not drag the cord across sharp tools or edges which could damage the cord. Do not try tomoveorunplugtheDustCollectorbypulling on the cord.

Page 5