330002 | Dust Collector |
General Information
Terms to Know
The main parts of the Dust Collector are: | Dust Collector Attachment Kit: |
1.Bag - A heavy duty, disposable,
2.
3.Filter Hood - Filters dust particles out of the air and returns dustfree air to the room. An adjustable retaining strap se- cures it to the main housing.
4.Rear Handle - Easily accessible for move- ment of the unit.
5.Power Switch - A rocker type on/off switch with an internal dust seal for extra safety.
6.Main Housing Assembly - Contains the motor and blower assembly.
7.Bag Clips - Three clips hold the bag whiletheretainingstrapisbeingattached.
8.Retaining Strap - Secures the bag to the main housing.
9.Base Pan - Supports the unit. Two front casters and two rear wheels are attached for easy mobility.
10.Two Hoses - Connect to the
11.Two Inlet Plug Assemblies - Placed in the
12.Two Extension Wands
13.Floor Pickup
14.Elbow Brush
15.Reducer - Allows you to connect the Shopsmith
Mark V Model 500 (sold separately).
16.Utility Pickup
Specifications
The Dust Collector’s specifications will give you an idea of its capabilities.
Bag: _________ 30 gallon capacity
Motor: _______ 1/2 hp
pacitor start.
Power Cord: __ 12' long
Airflow: ______ 330 cfm
Dimensions: __ 21" wide x 26" long x 48" high
Weight: ______ approximately 64 pounds
Figure 3
Page 7
