Shure AXS1 manual AXS 3 Dynamic Microphone

AXS 3 DYNAMIC MICROPHONE

The AXS 3 is a dynamic vocal microphone designed for sound rein- forcement and project studio recording applications.

Its smooth frequency response is tailored for vocals. The cardioid po- lar pattern remains uniform throughout its frequency range, ensuring high gain before feedback, maximum rejection of unwanted sound, and minimum off-axis sound coloration. A neodymium magnet pro- vides high output level and high signal-to-noise ratio.

A steel mesh ball grille, die-cast handle, and proven shock mount sys- tem ensure reliable performance, even in the roughest environments.

SPECIFICATIONS

Type: Dynamic

Polar Pattern: Cardioid (unidirectional), symmetrical about axis (Figure 3)

Frequency Response: 80 to 15,000 Hz (Figure 3)

Output Impedance:Rated at150 Ω (290 Ω actual) for microphone inputs rated at 75 to 300 Ω

Output Level (at 1 kHz): ±54.0 dBV/Pa ( 2.00 mV), open circuit voltage*

*1 Pa = 94 dB SPL

Polarity: Positive pressure on diaphragm produces positive volt- age on pin 2 relative to pin 3 of the microphone output connector

Operating Temperature Range: ±29° to 57° C (±20° to 135° F), at 0 to 95% relative humidity.

Switch: Built-in On/Off switch

Connector: 3-pin male XLR connector designed to mate with Can- non XL series, Switchcraft A3 (Q.G.) series, or equivalent

Case: Die cast zinc handle, black matte finish, dent-resistant ta- pered grille

Dimensions: 179 mm L x 50 mm W (7.1º L x 2.0º W)

Net Weight: 298 g (10.5 oz)

FURNISHED ACCESSORIES

Storage Bag	26A13
Break-Resistant Swivel Adapter	. A25D

OPTIONAL ACCESSORIES

Shock StopperTM Isolation Mount . . . . . . . . . . . . . . . . . . . A55M Windscreen (7 colors available) . . . . . . . . . . . . . A58WS Series 7.6 m (25 ft) Cable (XLR to XLR) . . . . . . . . . . . . . . . . . . . . C25J

5