Shure AXS1 manual AXS 6 Dynamic Instrument Microphone

AXS 6 DYNAMIC INSTRUMENT MICROPHONE

The AXS 6 is a high output dynamic microphone designed for profes- sional sound reinforcement and studio recording. Typical applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.

The AXS 6 features a smooth, extended frequency response that is ideal for a wide variety of instruments. Its cardioid pickup pattern is consistent throughout its frequency range, ensuring high gain before feedback, maximum rejection of unwanted sound, and minimum off- axis sound coloration. A neodymium magnet provides higher output and a greater signal-to-noise ratio.

A steel mesh grille, die-cast handle, and superior shock mount system allow it to maintain its high performance through even the roughest en- vironments. A built-in, locking stand adapter allows easy positioning and installation.

SPECIFICATIONS

Type: Dynamic

Polar Pattern: Cardioid (unidirectional), symmetrical about axis (Figure 6)

Frequency Response: 80 to 15,000 Hz (Figure 6)

Output Impedance: 150 Ω rated (290 Ω actual)

Output Level (at 1,000 Hz): ±54.0 dBV/Pa (2.00 mV) open circuit voltage*

*0 dB = 1 V/μbar

Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector

Operating Temperature Range: ±29° to 57° C (±20° to 135° F), at 0 to 95% relative humidity.

Connector: 3-pin professional audio (XLR)

Case: Die cast zinc, black paint finish, tapered grille

Stand Adapter: Built-in, locking, 180￿ swivel, 5/8±27 thread

Dimensions: 105 mm L x 49.5 mm W (4.13º L x 1.95º W)

Net Weight: 320 grams (11.28 oz.)

FURNISHED ACCESSORIES

Storage Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26A13

OPTIONAL ACCESSORIES

Windscreen (7 colors available)	A58WS Series
7.6 m (25 ft) Cable (XLR to XLR)	. . . . . . . . C25J

11