Shure AXS1 manual AXS 1 Unidirectional Dynamic Microphone, Specifications, Furnished Accessories

AXS 1 UNIDIRECTIONAL DYNAMIC MICROPHONE

The AXS 1 is a multi±purpose dynamic microphone designed to per- form in a variety of acoustically demanding environments. Its cardioid pickup pattern helps control feedback, rejects unwanted sound, and provides increased on-axis sensitivity. Its neodymium magnet pro- vides a high output level and increased signal-to-noise rato.

A superior shock mount system, a dent-resistant steel mesh grille, and a sturdy die-cast handle. A built-in pop filter protects against ex- cessive breath noise.

SPECIFICATIONS

Type: Dynamic

Polar Pattern: Cardioid (unidirectional), symmetrical about axis (Figure 1)

Frequency Response: 80 to 15,000 Hz (Figure 1)

Impedance (at 1 kHz): 260 Ω (actual)

Output Level (at 1 kHz): ± 55.5 dBV/Pa ( 1.7 mV) open circuit voltage*

*1 Pa = 94 dB SPL

Polarity: Positive pressure on diaphragm produces positive volt- age on pin 2 relative to pin 3 of the microphone output connector

Operating Temperature Range: ±7° to 49° C (20° to 120° F),t at 0 to 95% relative humidity.

Switch: Built-in On/Off switch

Connector: 3-pin male XLR connector

Case: Die-cast zinc

Dimensions: 160 mm L x 56 mm W (6.3º x 2.2º)

Net Weight: 317.5g (11.2 oz)

FURNISHED ACCESSORIES

Break-Resistant Swivel Adapter A25D

OPTIONAL ACCESSORIES

7.6 m (25 ft) Cable (XLR to XLR) . . . . . . . . . . . . . . . . . . . . . . . C25J

1