| SCL5 | WEARING THE EARPHONES |
|
| Sound Isolating Earphones | Two popular methods for wearing the earphones are illustrated below. | |
| The SCL5 combines Dual Live |
|
|
| Performance Drivers with an Inline |
|
|
| Crossover to create the same reference- |
|
|
| quality audio developed for |
|
|
| professional musicians. |
|
|
| The result of dedicated |
|
|
| speakers for highs |
|
|
| and lows is the faithful |
|
|
| reproduction of precision |
|
|
| highs, natural mids, and |
|
|
|
|
| |
|
| Over the ear |
|
|
| in back | Over the ear |
|
|
| |
|
|
| in front |
|
| Tighten the cable and take up slack by raising the cable sleeve . | |
©2007, Shure Incorporated | Printed in U.S.A. |
|
|
27EN3251 (Rev. 1) |
|
|
|
INSERTING THE EARPHONES
If the earphone seems to be lacking in low frequency response (bass), check the tightness of the seal between the earphone and your ear, or try one of the other sleeve options.
Warning: Do not push the earphone sleeve beyond the ear canal opening.
left ear | right ear |
|
Make sure that the sleeve completely covers the earphone nozzle. If any part of the nozzle is exposed, the sleeve is not properly installed.
CHOOSING AN EARPHONE SLEEVE
Your earphones come with a selection of sleeves. Make sure the sleeve you use is easy to insert into your ear, fits comfortably, and is easy to remove from your ear.
Soft Flex Sleeves
In small, medium, and large sizes. Made from pliable rubber.
Yellow and Black Foam Sleeves
When using the foam sleeves, compress the sleeve between your fingers before inserting it into the ear canal. Hold the earphone in place for about ten seconds while the foam expands and creates a tight seal. Black foams come in small, medium and large sizes.
If desired, the sleeve nozzle may be shortened. Use sharp scissors to carefully trim the nozzle to the desired length.
CLEANING THE EARPHONE NOZZLE
If the nozzle of your earphone is blocked, clean the nozzle using the supplied wax removal loop.
Wax Removal Loop
Nozzle
When cleaning, do not force any object through the earphone nozzle! This will damage the earphone sound filter.
If necessary, the supplied replacement nozzles may be used. See the back of this guide for instructions on nozzle replacement.
Warning: The wax removal loop is only to be used to clean earphones. Any other use, such as using the tool to clean ears, could result in injury.
SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL
Phone:
Shure Europe GmbH, Phone:
Shure Asia Limited, Phone: