English
Receiver LCD Interface
Menu Access
Press the Navigate key next to the menu item you want to select.
SHURERadio
| Audio | |||||||||
G: 3 Ch: 1 Out: |
| Util | ||||||||
| +12 dB |
|
|
|
|
|
| Hi |
| F, P, FP Sync |
+ |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| |||
Transmitter Status Display
Everything under the dotted line reflects the settings for the transmitter, if present. (main title screen only).
Accept Changes
After changing a parameter, the ENTER button flashes. Press it to save the value.
Cursor Control
Push the Control wheel to move the cursor to the next item.
Turn the Control wheel to change a parameter value.
Exit/Cancel
Press the Exit button to cancel changes and return to the previous menu.
Receiver Parameters
Use the following instructions to set parameters through the LCD interface.
NOTE: After adjusting a parameter, you must press the flashing ENTER button to accept the change.
Group and Channel
Menu: Radio
•Push the Control wheel to move the cursor to the Group (G) or Channel (Ch) parameter.
•Turn the Control wheel to change the parameter.
• Turn the wheel all the way down to mute the outputs.
Squelch
Menu: Radio > Squelch
• Turn the Control wheel to change the parameter
Frequency
Menu: Radio
•Push the Control wheel to move the cursor to the integer value (741.000 MHz) or fractional value (741.025).
•Turn the Control wheel to change the value.
Automatic Transmitter Sync
Menu: Sync
• See page 15.
Receiver Name
Menu: Util
•Turn the Control wheel to change the letter.
•Push the Control wheel to move to the next letter.
Output Level
Menu: Audio
This setting adjusts the signal level at the XLR and 1/4” audio output jacks.
•Turn the Control wheel to change the relative level in dB. (0 dB to
Receiver Lock
When locked, the receiver settings cannot be changed from the front panel. However, you can still navigate the LCD menu to view the settings (and turn the lock off).
Menu: Util > Lock
•Turn the Control wheel to toggle the lock on or off (ON or
OFF).
LCD View
Menu: Util > Title
•Turn the Control wheel to mark an item for display.
•Push the Control wheel to move to the next item.
LCD Contrast
Menu: Util > Contrast
• Turn the Control wheel to increase or decrease contrast.
Tonekey
Menu: Radio > Squelch > Tonekey
Tonekey squelch mutes the outputs unless the receiver detects a transmitter. Tonekey should be left on (On) except for certain troubleshooting operations.
9
