TURNING OFF THE REFRIGERATOR
If the refrigerator is not to be used for some time:
1.Shut off any valve in the gas line to the refrigerator.
2.Set the energy selector (A) to 0.
3.Empty the refrigerator. Defrost and clean it as descri- bed earlier. Leave the doors of the refrigerator and the frozen food compartment ajar.
IF THE ‘FRIDGE FAILS TO WORK
Check the following points before calling a service tech- nician:
1.That the STARTING THE REFRIGERATOR instruc- tions have been followed.
2.The refrigerator is level.
3.If it is possible to start the refrigerator on any of the connected sources of energy.
4.If the refrigerator fails to work on gas, check:
•That the gas bottle is not empty.
•That all
5.If the refrigerator fails to work on mains electric, check:
•That the mains electric supply is connected to the refrigerator.
•That the fuse is intact.
If the refrigerator is not cold enough it may be because:
1.The ventilation of the cooling unit is inadequate; see the paragraph PLACEMENT OF THE REFRIGERA-
TOR.
2.The evaporator is frosted up.
3.The temperature control setting is incorrect.
4.The gas pressure is incorrect - check the pressure regulator at the gas container.
5.The door is not properly closed or the magnetic sealing strip is defective.
If the refrigerator still does not work properly, call a service technician.
The sealed cooling system must not be opened, since it contains corroding chemicals under high pressure.
MAINTENANCE
Inspect the gas hose periodically for cracks or deep chafing marks. Connections can be tested for leaks using a soap solution. DO NOT USE AN OPEN FLAME! If there is any suspicion of damage, call for a service technician.
We recommend that a service technician check the refrigerator once a year.
SOME USEFUL HINTS
Make sure that:
•Defrosting is carried out periodically.
•The refrigerator is clean and dry with the door left open when it is not to be used for some time.
•Liquids or items with a strong odour are well pack- aged.
•There is a free air circulation over the cooling unit at the rear of the refrigerator.
TECHNICAL DATA
Overall dimensions: | V110 GE | V 170 GE |
Height | 1019 | 1456 mm |
Width | 592 | 592 mm |
Depth | 623 | 623 mm |
Capacity |
|
|
Gross, total | 110 | 185 lit. |
freezer | 15 | 47 lit. |
Weight (without packaging) | 50 | 68 kg |
Electrical data |
|
|
Input 120, 230, 240 V | 325 | 325 watt |
Lp gas data |
|
|
Input max | 0.33 | 0.48 kW |
Cooling medium | Ammonia | |
Sodium chromate is used for corrosion protection (less than 2 weight % of the coolant).
INSTALLATION INSTRUCTIONS
This appliance must be installed by an authorised person and conform to all relevant authorities.
PLACEMENT OF THE REFRIGERATOR
The room should have a capacity (length x width x height) of at least 20 m3 and must be adequately venti- lated as well as follow all relevant national and local regulations.
Further the room should have a window (which can be opened) or a door to the outside.
It is important that the refrigerator is not subject to radiation of heat from a stove etc.
For best performance also at high ambient temperatures there must be a free air circulation over the cooling unit at the rear of the refrigerator.
The refrigerator is designed for a
The refrigerator must be adjusted to a vertical position in both directions, see bubble level at the bottom of the refrigerator. Use the feet on the refrigerator to adjust its position.
LP GAS CONNECTION
The refrigerator is designed for operation on LP gas, the pressure of which must be 30 mbar for Propane. Check that this is stated on the data plate.
The refrigerator is not designed for operation on town gas or natural gas.
CAUTION! CHECK THAT THE GAS SUPPLIED TO THE REFRIGERATOR IS AT THE CORRECT PRESSURE. SEE THE REDUCING VALVE ON THE LP GAS CONTAINER.
5
