Siemens 200 Call setup

			Settings	83
Call setup		Ö	Condition set.
C¢T¢Call setup		Õ	Not set.
		Ô	Display if status is un-
¢Select feature.			known (e.g. with a new
Hide ID	b		SIM card).
		Clear all		b
When you make a call, your phone
number can be displayed on the re-		All forwards previously set are
cipient's display (depending on ser-		cleared.
vice providers).		Set up call forward (example)
To suppress this display, you can en-
		The most common condition for call
able the "Hide ID" mode for all sub-
sequent calls or just for the next call.		forwarding is, for example:
You may need to register separately		Unanswered		b
with your service provider for these
features.		I	Select Unanswered.
			(Includes the conditions
Call waiting	b		Not reachable, No reply,
			Busy, see below.)
If you are registered for this service,		C
you can check whether it is set and			Confirm.
you can activate/deactivate it.		Set	Select.
Divert
		C	Confirm.
You can specify the conditions under
which calls should be forwarded to		Ï/J Select or enter the phone
your mailbox or other numbers.			number to which the calls
Status check			are to be forwarded.
			§Mailbox§ Use existing mail-
You can check the current forward-
			box phone numbers, or
ing status for all conditions. After a
			enter them if necessary.
short pause, the current situation is
		§OK§
transmitted by the network and			Confirm. After a short
displayed.			pause, the setting is con-
			firmed by the network.